Assessments - 5, GPA: 3.6 ( )

Fabricante : LG Arquivo Tamanho: 74.78 kb Arquivo Nome : Língua de Ensino:

Adding a second weight will repeat the process. While the weight is on the scale it is permissible to press the PRINT key to store the value immediately. In this case the scale will not store the value when the weight is removed. The totals can be viewed as above. In all cases the scale must return to zero or a negative number before another sample can be added to the memory. More product can then be added and PRINT pressed again. This can continue for up to 99 entries, or until the capacity weight display is exceeded. - 9 - QHW digital weighing scales user’s guide SECTION 7 BATTERY OPERATION The scales can be operated from the battery if desired. The battery life is approximately 100 hours. When the battery needs charging the arrow above the low battery symbol under the weight display will turn on. The battery should be charged as soon as the arrow above the symbol is on. The scale will still operate for about 10 hours after which it will automatically switch off to protect the battery. To charge the battery simply plug into the mains power. The scale does not need to be turned on. The battery should be charged for 12 hours for full capacity. Just under the quantity display is an LED to indicate the status of battery charging. When the scale is plugged into the mains power the internal battery will be charged. If the LED is green the battery has a full charge. If it is Red the battery is nearly discharged and yellow indicates the battery is being charged. As the battery is used it may fail to hold a full charge. If the battery life becomes unacceptable then contact your distributor . - 10 - SECTION 8 RS-232 OUTPUT The QHW Series of scales can be ordered with an optional RS-232 output. Specifications: RS-232 output of weighing data ASCII code 4800 Baud 8 data bits No Parity Connector: 9 pin d-subminiature socket Pin 2 Output Pin 3 Input, not used at this time Pin 5 Signal Ground Data Format for normal weighing operations, parts counting or recalling of totals from memory will all be different. Examples follow: Normal Output GS 1.234kg GS for Gross weight, NT for net weight and a unit of weight No.. 1 This number increments every time a new value is stored in memory Total 1.234kg The total value stored in memory Includes 2 line feeds When percent weighing the output is the weight shown in percent only. GS 100.00% GS for Gross weight, NT for net weight and a unit of weight Includes 2 line feeds - 11 - QHW digital weighing scales user’s guide SECTION 9 PARAMETERS The scale has 6 parameters that can be set by the user. These allow the user to set the scale to: • Display the weight in other increments of weight to minimize the affects of vibration, wind or other environmental conditions. • Control the back light on the display. It may be necessary to turn the backlight off to maximize battery life. • Set the Accumulation to Automatic, manual or set the RS-232 interface to continuously print the weight. • Se...

Baixe o seu

Para fazer o download, introduza 2 dígitos :