Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
14 Battery Life............................................................................................ 14 Storage Capacity .................................................................................. 15 System Requirements .......................................................................... 15 Specifications........................................................................................ 16 Getting Started Knowing your camcorder parts Microphone Speaker Lens SD card slot (inside the battery cover) Bottom view Tripod socket Battery cover Flash strobe Strap hook Power button Shutter button AV IN( )/OUT connector /Earphone Previous button/ Fast backward button LCD monitor Zoom (in/out) button Record button MENU button Next button/ Fast forward button Play/Pause button Macro mode switch LED lights switch White balance switch Flash switch OK key/ Joystick 5-way USB connector * LED lights Status LED (left) / Charging LED (right) MODE button HD OUT * * inside the cover For select model only. If your camera only indicates “ AV OUT”, it does not support “AV IN” function. 1 Installing the battery 1. Slide the battery cover open. 3. After the battery is properly installed, replace the battery cover. 2. Place the accessory Li-Ion battery into the compartment. Note that the metallic contacts must be aligned with the contacts in the compartment. Charging the battery Please charge the battery at least 8 hours for first time use. 1. Connect the cable. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the camcorder and the other end to a powered PC. Make sure the camcorder is powered off. 2. The charging LED turns red and the charge starts. 3. When the charging is interrupted or the battery pack is fully charged, the charging LED will turn green. When using a PC to charge the battery, do not power on the camcorder, or the charge will stop. Inserting a memory card (optional) To insert a memory card, do the followings: (1) Open the battery cover. (2) Gently push the card as indicated until the card reaches the bottom of the slot. To remove the memory card, gently push the card and it will pop up. Then pull the card out of the slot. Turning on/off your camcorder Open the LCD monitor or press and hold down the Power button for 1 second to turn on the camcorder. To turn off the camcorder, press and hold down the Power button for 1 ~ 3 seconds or close the LCD monitor. If the camcorder stays inactive for a long period of time, it may automatically shut down due to the Auto-Off setting. Setting language 1. Power on the camcorder. 2. Press the MODE key to enter the MODE menu. 3. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. 4. Use the Joystick to select the Language item, and then Press OK to confirm. 5. Move the Joystick up/down to select a language. 6. When done, press OK to confirm the setting. Reading LCD indicators 00:06:4000:00:05 1 Mode icon Remaining recordable time Video resolution While Balance mode Picture resolution Exposure mode LED lights mode Flash mode Macro mode Histogram mode Battery life Selftimer mode Zoom ratio indicator NightShot mode SD card inserted Recording time The LCD will display 4:3 ratio while setting as CIF video resolution. (Please refer to the page 5 for more detailed instructions.) Basic Operations Recording a video clip 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close- up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory card is inserted before recording. -30cm ~ (12” ~ ) 5cm ~ 30cm (2” ~ 12”) * At 1.5X fixed zoom 2. Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. The optical magnification is 3X. 3. Press the Record button to start recording. 4. Press the Record button again to stop recording. The zoom function is also available during recording (except in macro mode). If the surroundings are dark, you can switch the LED lights mode to On or Auto to help focus and lighting. It’s normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. Recording a voice clip 1. Power on the camcorder. 2. Press the MODE key to enter the MODE menu. 3. Use the Joystick switch to select the Voice Recorder mode and press OK to enter the menu screen. 4. Press the Record button to start recording 5. Press the Record button again to stop recording. 44 Taking a still picture 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close- up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory card is inserted before recording. -30cm ~ (12” ~ ) 5cm ~ 30cm (2” ~ 12”) * At 1.5X fixed zoom 2. Zooming: Move the Zoom button up or down to zoom in or zoom o...
Este manual também é adequado para os modelos :Câmaras de vídeo - Action Z5X5P (3.42 mb)