Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
The best and easy way is to configure the PC to get an IP address from the WebShare 241 Router ADSL2+ (DHCP client). Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals. Before you configure this WebShare 241 ADSL Router2+, you need to know the following default settings: • Username:admin • Password:atlantis • IP address (192.168.1.254), Subnet Mask (255.255.255.0) • DHCP Server: enable 1.6 IE Configuration Now open IE, go to Instruments menu, select the Connections tab and select one of the following options: • Never use remote connection • Use remote connection if another network connection isn’t available 1.7 TCP/IP Configuration Configuring PC (Windows 95/98/ME) 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NIC Compatible, or the name of any Network Interface Card (NIC) in your PC. ENGLISH 3. Click Properties. 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration. Configuring PC (Windows NT4.0) 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. Configuring PC (Windows 2000) 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. ENGLISH 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC (WindowsXP) 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection. 3. In the LAN Area Connection Status window, click Properties. ENGLISH 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. ENGLISH 6. Click OK to finish the configuration 1.8 Browser configuration Open the web browser, enter the local port IP address of this WebShare 241 Router ADSL2+, which default at 192.168.1.254, and click “Go” to get the login page. The default username is admin, password atlantis and click “OK” to continue. ENGLISH At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: • Status (ARP Table, Routing Table, DHCP Table, System Log, Security Log) • Quick Start • Configuration (WAN, LAN, System, Firewall, QoS, Virtual Server, Advanced) • Save Config Click on the desired item to expand the page with all settings in the main navigation pane. Following next steps you can make operating WebShare 241 Router ADSL2+ in short time using PCs in DHCP mode. Refer to manual on Installation CD if you need personalized configuration. Click on Configuration, WAN, then ISP (Change) to chose the protocol selection. ENGLISH Click on Next to continue. Click on Next to continue. PPPoE routed/PPPoA routed PPPoA/PPPoE is known as a dial-up DSL or cable service. It is designed to integrate the broadband services into the current widely deployed, easy-to-use, and low-cost dial-upaccess networking infrastructure. Therefore, users can get greater access speed without changing the operation concept, sharing the same ISP account and paying for one access account. These are configuration parameters: ENGLISH • Virtual Circuit: Enable • VPI: 0 or 1 (check with your ISP) • VCI: 38 or 50 (check with your ISP) • NAT: Enable • Username: Enter the username provided by your ISP(case sensitive). • Password: Enter the password provided by your ISP (case sensitive). • Service Name: This item is for identification purposes. If it is required, your ISP will provide you the information. • IP Adress:0.0.0.0 • Authentication Protocol Type: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap. • Connection: Chose Always On If you want the router to establish a PPPoE/A session when starting up and to automatically re-establish the PPPoE/A session when disconnected by the ISP. Chose Connect on Demand If you want to establish a PPPoE session only when there is a packet requesting access to the Internet. • Idel Timeout: Auto-disconnect the Router when there is no activity on the line for a predetermined period of time. • RIP: No Rip • MTU: 1492 (PPPoE), 1500(PPPoA) Press Apply and the...