Assessments - , GPA:
(
)
)
Fabricante : Panasonic
Arquivo Tamanho: 986.28 kb
Arquivo Nome : AWE800.PDF
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
After the use mode setting menu is shown for about 5 seconds, the camera returns to be ready for operation. Then, the camera operates in the selected use mode. ■ SETTING BY RCU (RCB) OR HYBRID CONTROL PANEL An operation mode is selected depending on the position of the scene file switch. Operation mode Scene Fite Switch Position of RCU (RCB) Scene File Switch Position of Hybrid control panel Halogen Mode 1 1 Fluorescent Mode 2 2 Outdoor Mode 3 3 User's Mode USER SET 4 MENU ITEM/AWC Y*S YES/ABC —f*o NO/BAR RCU (RCB) h-xQQ n| Qauto „ ped à ( ); ; P) ' \mn* * rrcrtr SCENE FILE Switch -28- Hybrid Control Panel fenasonic WTCMIM AWC 19C OPERATE O V 9 P LJ MODE SHuTTEft $C( t4t w an H -fl b I Q 0 Main Menu of User Mode /-\ **User Mode Sot** Iris, Shutter, Sain Sot Color Sot S/L, Color Bar Sot Dotail Setl Detail Set2 Color Matrix Set Other Setl Other Set2 Option Card Set Initialize Data End Use Mode Blinking V, ■ SETTING 1. From the camera alone: Keep the MENU switch depressed for 5 seconds or more. From RCU (RCB): Set the user set switch in the pocket to the ON position. The main menu appears on the monitor screen. 2. Each time the MENU switch (t), ITEM/AWC switch (4), or NO/BAR switch (-) is pressed, the blinking item moves up or down. 3. When the YES/ABC switch is pressed after selecting the desired item to blink, the submenu for the selected item appears on the screen. 4. Select the desired item to be changed in its settings using the the MENU switch (t) and ITEM/AWC switch (i). 5. Press the YES/ABC switch (+) or NO/BAR switch (-) to change the settings. 6. Select [Return] using the MENU switch and ITEM/ AWC switch, then press the YES/ABC switch to return to the main menu. 7. After changing the settings, take the following steps. Camera alone: Select [End] using the MENU switch and ITEM/AWC switch and press the YES/ABC switch. -3 RCU (RCB): Set the user set switch in the pocket to the OFF position. The camera will now operate according to the new settings. CAMERA MENU ITEM/AWC YES/ABC NO/BAR RCU (RCB) USER SET SWITCH 0' ■ SUB MENU (Halogen Mode, Fluorescent Mode, Outdoor Mode) a © o — 0 © О о “Brightness Set** "Picture Level ±0 Light PEAK/AVG 0 Light Area Top cut Auto ND(BLC) (OFF) Auto Sain Up (OFF) Мали Gain Up (OdB) -Pedestal (±0) 'Contrast(Gamma) MID Return **G/L, Color Bar Set** —H Phase ф--SC Coarse SC Fine Color Bar Set (±0) (1) (±0) (7.5IRE) **Other Set** ;«Г~ """Shutter Speed vSTT--Synchro Scan V Resolution -Baud Rate 'Nega/Posi -Aspect Ratio .Fan Return (OFF) Normal 9600bps Posi 16:9 ON SS © Ф- Ф **Color Set** PhrmM Level ±0 Flesh Tone ±0 White Bal (AWC A) Highlight Chroma OFF Return ф* Œh — ‘Sharpness (DTL) set** ■DTL Select Normal Level (HIGH) Noise Suppress OFF Flesh Noise Suppress OFF Return • Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode. • To return to the initial settings, refer to page 46. -31- ■ Setting and Changing of the Setting (Halogen Mode, Fluorescent Mode, Outdoor Mode) O Video Level Adjustment [Picture Level: -50 - +50] Convergence level of AUTO IRIS/AUTO GAIN UP/ AUTO ND (ELC) can be adjusted. 0 Detecting Ratio Adjustment [Light PEAK/AVG: P50 - A50] The ratio of AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC) detected peak to average can be adjusted within a predetermined range. G Photometric Measurement Method Setting [Light Area: All, Center, Top cut, BTM cut, R/L cut A photometric measurement method can be selected for AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC). All: All the screen area is measured. Center: The screen is measured mainly in the center area, about one-third of both the top and bottom and one-third of both the right and left portions of the screen are excluded from measurement. Top cut: About one-third of the top part of the screen is exclu...