Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Press UP A or DOWN ▼ to select! DATE/TIME --- CLOCK SET --- TIME ZON ; EASTERN D. S. T. : Al/TO 1 SELECT SET ENO N. IlflU ; 12:00 :00AM JAN 1 2000 PUSH WAKEY PUSH OtSPLAY KEY PUSH MENU KEY Press DISPLAY ior DATE/TIME menu. - - - OATBT1ME SETTING - - • -1 2t 0 0 : 0 Ö AM-"J'A'N 1 20 0 0 Press or hold down UP A or DOWN ▼ to select hour, then press DISPLAY to fix. Repeat for minute, month, day, and year. Clock starts when year is entered and DISPLAY is pressed. Press MENU twice to exit. 21 Built-in Auto Light Using the Light For recording in dim lighting. Replacing the Bulb DANGER: Use only replacement bulb (PART NO. VLLW0015) supplied by Panasonic to reduce risk of fire. Handle new bulb with cloth or tissue as skin oils will decrease bulb life. Remove lens cover and allow bulb to cool before replacing to avoid possible burn hazard. Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. Set LIGHT to AUTO. Light turns on/off automatically according to lighting conditions. Or, set LIGHT to ON/OFF manually. ?D> appears in EVF or LCD Monitor when Light is on. Caution: Light becomes hot. Never cover Light while on. Before you begin... • Order Part No. VULS0001 (VLLW0015 and cushions) for replacement bulb unit. • Set POWER to OFF. 1 2 Press in on both sides of lens cover and pull straight out and off. Using Tweezers or needle-nose pliers, carefully remove bulb. • Take unit to service center if you need assistance. Replace bulb using a clean cloth or tissue. Replace lens cover. Note: • Using Light reduces battery operating time. • Provide proper ventilation when using Light extensively in hot environment. • Using Light when the Camcorder is powered by a car battery may shorten bulb life. • Set Light to OFF when not in use. • Handle bulb gently. Excessive force may cause bulb to crack. 22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Camera Recording Simple Recording Tally Lamp Before you begin... • Connect Camcorder to power source. • Insert cassette with record tab (page 15). Built-in Twin Capsule 2-Way Microphone System 1 Set POWER to CAMERA. Lens Cover opens. r EVF or Power lamp lights. LCD Monitor • Be sure POWER is fully turned to CAMERA position. \ PAUSE -J 2 3 4 Record/Pause mode. Look into EVF and adjust VISION ADJUSTMENT to your eyesight. Slide TAPE SPEED to SP or SLP (page 15). Press RECORD/PAUSE to start or pause recording. Tally lamp lights if set to ON (page 37). RECORD Set POWER to OFF when finished. •To remove cassette, slide TAPE EJECT in Record/ Pause mode, (page 15). Note: • When Camcorder is aimed at excessively bright objects, or bright lights, a vertical bar may appear in the picture. This is normal for the CCD pick-up. Try to avoid this when possible. 23 Camera Recording Using the LCD Monitor View recording scene on the LCD (Liquid Crystal Display) monitor. Before you begin... • Connect Camcorder to power source. * Insert cassette with record tab (page 15). 1 Press LCD-OPEN to unlock LCD monitor. ^ Swing LCD monitor fully open and adjust viewing angle. Caution: Rotating partially open LCD monitor may block cassette door and damage Camcorder body. O Set POWER to CAMERA. • EVF or LCD monitor turns on/off by the POWER switch. • EVF shuts off when LCD monitor is opened and turns back on when LCD is closed. • Both EVF and LCD monitor turn on when LCD is at 180° (see above left). This allows both you and the subject to view the recording. 4 Turn BRIGHT control to adjust LCD monitor brightness level. 5 Press RECORD/PAUSE to start recording (page 23). Note: • Using LCD monitor reduces battery operation time. • Return LCD monitor to locked position when not in use. 24 For assistance, please call : 1-800-211 -PANA{7262) or send e-mail to : consumerproducts@panasonic.com Camera Recording Stand-by Quick Release If left in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand-by mode to conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by pressing RECORD/PAUSE two times. New camcorders will default to OFF. RECORD/ PAUSE 2 3 4 Before you begin... • Connect Camcorder to power source. • Insert cassette with record tab (page 15). 1 Set POWER to CAMERA. Press MENU for MENU mode. Press UP A or DOWN ▼ to select STAND-BY RELEASE • • - MENU • - - PAGE 1/2 PROGRAMMED REC TTTLE : AUTO/MANUAL TALLY LAMP : ON lAflMfllsTdiaad ; OFF SELECT SET ENO PUSH ▼/* KEY PUSH DISPLAY KEY PUSH MENU KEY W Press DISPLAY to select ON/OFF. ON: From Stand-by mode, press RECORD/PAUSE two times to resume recording. OFF: From Stand-by mode, set POWER to OFF, then to CAMERA. Press RECORD/PAUSE to record. Press MENU to exit. 25 Camera Recording Easy Edjt Standcby^ ?j For a smooth transition between scenes if recording is stopped, and then started within 24 hours. Before you begin... • C...