Assessments - 4, GPA: 3.3
(
)
)
|
Facilidade de uso
Press UP A or DOWN ▼ to select • - • MENU PAGE 1/2 PROGRAMMED REC bifeiU ; PHRASE TALLY LAMP ; ON STAND-BY RELEASE ; OFF CLOCK SET T SELECT: PUSH T/A KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY 3 4 5 6 Press DISPLAY to select PHRASE. Press MENU to exit. In Pause (Record mode), press TITLE repeatedly to display phrases from iist below, left. To record the phrases, Press RECORD/PAUSE. Press TITLE while recording to remove phrase. Note: • To redisplay phrase, press TITLE in Pause (Record mode). 45 Viewfinder/LCD Monitor Indications Tape remaining and battery charge level can be displayed. Set POWER to CAMERA. 1 2 Press DISPLAY repeatedly to select the following displays. Battery Remaining: FULL Tape Remaining: -G3 - {No tape) □ □[ ¿3 13 EMPTY 3 FULL • Tape remaining indicator operates a few EMPTY seconds after tape starts moving. Recording the Date and Time 1 2 Do steps 1 and 2 above to select time/date, date only, or no display. Start a recording (page 23). • Only the Date and/or Time are recorded. Display-Off Mode No Indication, except Intelligent Titler (pages 43-45), will be displayed. Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. 1 2 3 Press MENU for MENU mode. Press UP A or DOWN ▼ to select Press DISPLAY to select OFF. Press MENU to exit. DISPLAY Press DISPLAY repeatedly to remove time/date. Indications are restored when Camcorder is turned off, and then on again. 46 For assistance, call 1-800-211-PANA(7262) PAGE 2/2 1 - - MENU •- hTWi’TXl : ON SELF OCUO : OFF SECURITY ; OFF VIDEO EFFECTS ; FADE BLACK CLOCK SET UlMdlM ; ON SELECT : PUSH T/A KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY SELECT: PUSH ▼ (A KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY CAMERA MODE VCR MODE Viewfinder/LCD Monitor Indications CAMERA/VCR mode fîsnailK-ïlIU«!« II ГО: 2 О I Я i Ph n~i~Sl И >1 000 01 ITtEUb ID.ZOOM! I5PIMFIOI CHECK TAPE 1 2:00:00AM JAN 1 2000 Si IFADE SHR RED 1 Battery Remaining “WARNING LOW BATTERY” appears and Power Lamp starts flashing 15 seconds before Camcorder shutoff. Tape Remaining • If RECORD/PAUSE is pressed with no cassette, or cassette has no record tab in Camera (RECORD) mode, “S3” flashes 1 minute and “CHECK TAPE" appears 5 seconds. • If PLAY. FF or REW is pressed with no cassette inserted in VCR mode, “d]’’ flashes 1 minute and “CHECK TAPE" appears 5 seconds. • As end of tape is reached, “El” flashes and “TAPE END” appears 5 seconds. 10-Second Reminder Each time a recording is started, a 10 second incremental display (up to 59:50) lets you monitor how long one scene is recorded. 0:00 0:10 0:20 ..... 59:50 (page 46) 4 TAPE SPEED (pages 15, 23) (SP=standard play, SLP=super long play). Operating Mode REC (record) PAUSE FF (fast forward) PLAY REW (rewind) (return to 0:00 and continue) 47 Viewfinder/LCD Monitor Indications CAMERA/VCR mode 1 2 3 4, 5,6 rwr-w 15fix E I S D.ZOOMI Mil "II iHI'I'M'l 0: 2 01 S L PI l~EEU] I5PIMFIOT VCR-MODE 8 9 10 11 FADE 1 2:00 :00AMI JAN 1 2 0 0 Öl SHR RED 12 13 1 Zoom Magnification level (page 34). 2 Digital E.I.S. (page 41). 3 Digital Zoom (page 40). 4 VCR-MODE Appears 1 minute when POWER is set to VCR or if RECORD/PAUSE is pressed in VCR mode. 5 DEW If moisture condensation occurs in unit, “WARNING DEW DETECTED” appears, Power Lamp flashes, and Camcorder will shutoff in 15 seconds. Wait until lamp no longer flashes when Camcorder is turned on to use. 6 Security Mode (page 42). 7 Date andTime (page 21). 8 Backlight (page 34). 9 Manual Focus (page 35). 10 Light ON/OFF (page 22). 11 High Speed Shutter (page 36). 12 Fade (page 38). 13 Color Digital Fade (page 39). 48 For assistance, call 1 -800-211 -PANA(7262) Operation Notes Attaching Optional Filters and Lenses When you remove the Lens Hood, pinch the Lens Hood and turn it counterclockwise as illustrated at right. Then attach an optional filter or lens. • Be careful not to touch the lens itself. • Replace the Lens Hood after removing the accessory. Lens Hood Area Operation Caution With a Wide or Telephoto conversion lens (optional) attached, the four corners of the screen may darken when zoom is set to maximum wide angle. When attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after a filter (optional) has been attached, the four corners of the screen may darken when zoom is set to maximum wide angle. With two filters (optional) attached, the four corners of the screen may darken when zoom is set to maximum wide angle. Cleaning EVF (Electronic Viewfinder) To Remove 1 © Remove the screw with a Phillips screwdriver. Turn counterclockwise. ©Turn the EVF Eyepiece. © Pull the EVF Eyepiece. Remove any lint or dust particles with a soft clean cloth being careful not to scratch the glass surfaces. Replace the EVF Eyepiece and the screw. 49 Replacing Clock/Remote Battery The clock and remote batteries are pre-insta...