Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
Check the list below for symptoms and corrections. Symptom Correction No picture in the EVF ... • Make sure a Power Source is connected, (pp. 7, 9) • Make sure the POWER switch is set to VCR or CAMERA, (pp. 18, 22) • Check the Dew Indicator, (p. 16) • Make sure the battery is fully charged, (p. 7) • Make sure all necessary cables are connected correctly and firmly, (p. 24) Video cassette can’t be inserted ... • Make sure a Power Source is connected, (pp. 7, 9) • Insert the cassette with the window side facing out. (P. 10) Video cassette can’t be removed ... • Make sure a Power Source is connected, (pp. 7,9) No operation starts when operation buttons are pressed ... • Check the Dew Indicator, (p. 16) Recording cannot be done... * Make sure the record tab is still intact, (p. 10) * Check the Battery Indicator, (p. 15) * Check the Dew Indicator, (p. 16) Auto Focus does not operate ... * Make sure the FOCUS button is set to AUTO. (p. 27) • Make sure the unit is ON, with the POWER switch set to CAMERA (p. 18). Sound from microphone can’t be monitored ... • Make sure the unit is set to REC or Record/Pause mode. No playback picture, or the playback picture is noisy or contains streaks ... • Press the Clock Set UP A/DOWN ▼ button during playback (Tracking Control) (p. 22). During playback, the picture shows motion or blurred action... • Portions of the still picture where the normal speed motion was particularly rapid may produce this effect. This is normal. If the top of your playback picture waves back and forth excessively... • Because the playback signal is not as stable as an off the air TV signal, the top of your TV screen may be bent or unstable when the tape is played back. This symptom is more noticeable when a tape, recorded on another VCR, is played back. To solve this problem, locate the horizontal hold control on your TV. Turn it slowly to correct the wavy picture. If your TV does not have a horizontal hold control or adjusting the control does not help, some modifications may have to be made to the TV set. Technically this is called “Horizontal AFC time constant change." If such a problem exists, please contact your local TV sen/ice center. (Some nominal sen/ice charges may be required.) 35 For Your information Before Requesting Service (a) Video Head Cleaning: Your Palmcorder will not normally require head cleaning; however, it is possible that the heads may become clogged when playing an old or damaged tape. If the image on your screen resembles the photograph on the left while playing back a tape, the heads may require cleaning. (b) Cleaning the Heads: It is recommended that head cleaning be performed by a qualified service technician. Please contact your nearest Panasonic Service Center. An alternate solution is to obtain a head cleaning cassette. There are many types of cleaning cassettes, so be sure to follow the cleaning instructions carefully. Excessive use of the cleaning cassette could shorten head life. UseJhis cassette onlywhen a head clogging symptom occurs. Refer servicing to qualified service personnel. Auto-Reset The Palmcorder, provided no tape is inserted, will reset the Backlight, High Speed Shutter and Focus to their AUTO or OFF modes if, after activation, none of these buttons are pressed within 5 minutes. Clogged Video Head Request for Service Notice Pleas© photocopy this form when making a request for service notice Request for Service Notice: in the unlikely event this product needs service. • Please include your proof of purchase. (Failure to due so will delay your repair.) • To further speed your repair please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL. 60123-7847 Attn: Camcorder Repair 36 Index of Controls Front View Built-In Twin Capsule Built-In Lens Cover Opens automatically when the Power Switch is set to CAMERA. See pages 6, 18. MANUAL FOCUS Wheel See page 27. POWER Switch See pages 6, 15, 18, 20, 21, 22. 24. Rear View POWER Lamp Lights when the Power Switch is set to VCR or CAMERA. See pages 6,16.! REWIND/SEARCH Button See pages 6, 21, 22. CLOCK SET UP ▲ Button See pages 11, 12, 13, 20. (Tracking Control) See page 22. Strap Attachment Rings See page 17. DC IN Connector See page 9. BATTERY RELEASE Button See page 7. Audio/Video Output Connector See pages 24,30. (This connector for use with supplied Audio/Video cable only.) PLAY Button See pages 6, 21, 22, 30. STILL Button See pages 21, 22, 30. FAST FORWARD/ SEARCH Button See page 22. STOP Button See pages 6, 15, 22, 30. Hand Strap See page 17. RECORD/PAUSE Button See pages 6, 18, 20, 21, 26, 29. DOWN ▼ Button See pages 11,12, 13, 20. (Tracking Control) See page 22. 37 For Your Information Index of Controls PUSH TO CLOSE Button LCD-OPEN button See pages 19, 23. Volume ...