Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
1 LJ UVWXYZ 012 FACTORY 6 6 □ 3456783<=> E □ STILL ►H LOAD SAVE DELETE POWER UP PASS- WORD LOCK "exTT -133- USER SET UP menu Function keys Key Item Function F1 LOAD File loading When this key and the F key are pressed together, the selected file is loaded. F2 SAVE File saving When this key and the F key are pressed together, the selected file is saved. F3 DELETE File deletion When this key and the F key are pressed together, the selected file is deleted. F4 - F5 POWER UP File loading when power is turned on LAST: The last file is loaded. FACTORY: The factory file is loaded. 1-10: The user file is loaded. F6 F7 F8 EXIT Operation is returned to the SET UP menu. F9 LOCK File locking This key is pressed together with the F key. The selected file is locked to disable updating or deletion. The lock is released when the key is pressed again. This function is used for user files 5 to 10. F10 PASSWORD This is pressed to set the password. F11-F13 - -134- USER SET UP menu Functions □ Saving user files Twelve files are provided with this unit. Two of these files are reserved: the LAST file containing the statuses applying when the power was last switched off, and the FACTORY file containing the statuses established at the factory (default settings). These two files cannot be deleted or updated. The remaining 10 files are user files. The user can use them to enter any menu settings which can then be loaded, deleted or updated at the user’s preference. (1) Establish the status in which the menu settings are to be entered. Refer to the table at the end of these instructions for what is saved on the files. •Where a UNITY or VAR setting is involved, the VAR value will nevertheless be saved even if UNITY has been selected. (2) Press the cursor keys to select the number of the file to be entered. The cursor first appears where it was previously assigned. FACTORY □ 2 3 4 (3) Input the file name. Up to 20 characters can be input. 1. EDITOR 1 (4) Press the F and F2 (SAVE) keys together to save the file. •Numbers 0 to 9: Press the corresponding number keys. • Proceed as below to enter letters of the alphabet. 1) Press the cursor center key. 2) Move the cipher cursor to the left or right using the ADJUST control to select the desired character. When the F and cursor keys are pressed together, the cursor can be moved up or down as well as to the left or right. 3) Press the ENT key to input the character under the cursor. 4) Press the cursor center key to complete the character input. •To correct a character, press the BS key. To proceed with input again from the beginning, press the C key. The password is required to enter files 1 to 4. (1) Press the F10 (PASSWORD) key. (2) Input the 4-character password. •Discuss the choice of a password with the servicing engineer. File name input 0b c DE G H I J K L M N p Q RST U V H Xv 'Z 0 1 2 34 5 6' ?8 9 < - > ? : + 5 - - ( > ■ - ED El E -135- USER SET UP menu □ Locking user files In this mode, files are protected and can no longer be deleted or updated. (1) Press the cursor keys to select the file to be locked. 1. EDITOR 1 □ (2) Input the password for files 1 to 4. Press the F and F9 keys together for files 5 to 10. When a file is locked, it is highlighted on the display. 1. EDITOR 1 (*] •To release the file lock function The lock on files 1 to 4 is released when the password is entered. 1. Press the cursor keys to select the file whose lock is to be released. 2. Press the F10 (PASSWORD) key. 3. Input the 4-character password. If the password input is correct, the lock is released; if it is incorrect, the lock is not released. The lock on files 5 to 10 is released when the F and F9 keys are pressed together again. 1. EDITOR 1 □ □ Updating user files (1) Press the cursor keys to select the file to be updated. • If the file is locked, release the lock. 1. EDITOR 1 □ (_Lock released (if this is highlighted, release the lock) (2) Change the contents of the files. For instance, press the F4 (TC/CTL) key on the HOME menu to change the setting from TC to CTL1. (3) Press the F and F2 (SAVE) keys together. The file with the revised contents will be saved. The F4 (TC/CTL) key setting is changed to CTL1 when the F and F1 (LOAD) keys are pressed together and then the HOME button is pressed to enter the HOME menu. •The contents prior to the change are deleted. -136- USER SET UP menu □ Deleting user files This function deletes unnecessary files. (1) Press the cursor Keys to select the file to be deleted. 5. EDITOR 2 (File locked) (2) Check that the lock on the file to be deleted has been released. If it is still locked, refer to “Locking user files” to release it. 5. EDITOR 2 □ (Lock released) (3) Press the F and F3 (DELETE) keys together. The file is deleted. •The file cannot be deleted unless the file lock is released first. □ Loading user files This function loads a saved file. ...