Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
“DOOR” next to "ID" is for preset position number 1 in the example shown right. • Preset numbers 1 through 4 are linked to alarm inputs 1 through 4. If alarm input 1 comes in, the camera turns to preset position 1, or to other positions according to alarm input 2, 3 or 4. • The PRESET NUMBER SET menu indicates the 8 preset positions (1 - 8) for the WV-CS554 combination camera. • Position Setting 1. Move the cursor to POSITION SET on the preset setting menu and press the CAM (SET) key. The position setting menu is displayed. 2. To Set Panning/Tilting Positions (1) Move the cursor to PUSH SET next to PAN/TILT and press the CAM (SET) key. The PAN/TILT setting menu appears. (2) Select panning/tilting positions by moving the joystick up and down, right and left, and press the CAM (SET) key. The positions are set and the screen returns to the position setting menu. PAN/TILT setting menu Setup menu •* SET UP MENU »* PRESET MAP '» HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON LOCAL /REMOTE LOCAL SPECIAL1 % CAMERA '* RSI 6 5 SET UP 'I Setup menu ** SET UP MENU ** PRESET 1 "» MAP •* HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON LOCAL/REMOTE LOCAL SFECIALl "1 CAMERA '* RS485 SET UP "» PRESET NUMBER SET menu (1-32) ** PRESET NUMBER SET ♦* i: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 2« 27 26 29 30 31 32 ID DOOR 33-64 RET PRESET NUMBER SET menu (33-64) *• PRESET NUMBER SET * 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 ID: 1-32 RET Preset setting menu PRESET NO . 1* POaiTION'SET’L. V PRESET ID ON 'I ALC/MANUAL ALC Ч DWELL TIME 10S SCENE FILE OFF PRESET SPEED ........1 L H RET DEL Position setting menu ___ ** POSITION i ** PAN/TILT -»PUSH SET ZOOM/FOCUS -4PUSH SET lU_,TILT_D/L.PAN_Rj PAN OFFSET SET i- -0.0 -i RET FLOOR1 DOOR ** POSITION 1 ** PAM/TILT aPUSHZSET. ZOOM/FOCUS PUSH SET PAN OFFSET SET «- -0.0 -* RET FLOOR1 DOOR 17 3. Pan Offset If the camera is replaced with a new one, Pan Offset is used to adjust its positions to be the same as before except patrol setting. The controller can be downloaded or uploaded the camera preset position data. Caution: The preset data for conventional camera (WV-CS654 for example) is incompatible with WV-CS854A’s. WV-CS854A’s preset data will be destroyed if you upload the conventional data. When this happened, prepare a WV-CS854A having the initial factory settings. Download the factory settings into the controller and then upload to the camera whose data is destroyed. (1) Display the PRESET NUMBER SET menu. (2) Select a position number for the picture to be most enlarged among the numbers by moving the joystick. Then press the CAM (SET) key. POSITION setting menu appears. (3) Move the cursor to PAN OFFSET SET and select the right or left arrow by moving the joystick. (4) Press the CAM (SET) key until the desired offset value in degree appears. (5) Move the cursor to other than PAN OFFSET, then press the MON (ESC) key. Notes: • Further adjustment of the other positions is unnecessary. This adjustment applies to all other positions. • Make sure to move the cursor before pressing the key in step 5. Otherwise the settings will be ignored. • Retry when the camera fails to upload or download the data, 4. To Set the Lens Zoom and Focus Positions (1) Move the cursor to PUSH SET next to ZOOM/FOCUS and press the CAM (SET) key. The ZOOM/FOCUS setting menu appears. (2) Select a zoom position by moving the zoom control up and down, and a focus position by moving the focus control up and down, and then press the CAM (SET) key. The positions are set and the screen returns to the position setting menu. Notes: • When the camera is used at a nearly horizontal angle, the focus may not be adjustable to a high level of accuracy. • If you move the cursor to POSITION number and move the joystick right or left, the position number can be selected. The selected preset position number can also be set after pressing the CAM (SET) key. • The preset and camera IDs appear at the lower-left corner of the position setting menu after setting them. PRESET NUMBER SET menu (1-32) •• PRESET NUMBER SET 1; : 2 3 4 5 e 7 8 9 10 11 12 13 14 15 16 17 is 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ID:DOOR 33-64 RET Position setting menu ** POSITION 1 * * PAN/TILT -(PUSH SET ZOOM/FOCUS -iPUSH SET PAN OFFSET SET T o o RET FLOOR1 DOOR Position setting menu *• POSITION 1 PAN/TILT -»PUSH SET ZOOM/FOCUS BPUSH'SET, PAN OFFSET SET RET FLOOR1 DOOR ZOOM/FOCUS setting menu ** POSITION 1 ** PAN/TILT -*PUSH SET ZOOM/ FOCUS -»PUSH SET U_ZOOM.D/L.FOCUS R PAN OFFSET SET 4- -0.0 RET FLOOR1 DOOR Position setting menu •* POSITION 1 * PAN/TILT -»PUSH SET ZOOM/FOCUS -iPUSH SET PAN OFFSET SET «- -0.0 -» RET FLOOR1 DOOR 5. Mo...