Assessments - 2, GPA: 3.5
(
)
)
|
Fotos e especificações Sony HDR-AX2000E |
por este dispositivo também tem outras instruções :
Facilidade de uso
Because of the way that the image device (CMOS sensor) reads out image signals, the subjects passing by the frame rapidly might appear crooked depending on the recording conditions. The LCD screen is too bright, and the subject cannot be seen. • Set [BACK LIGHT] to [OFF]. The LCD screen is too dark, and the subject cannot be seen. • Press and hold the DISPLAY button for a few seconds to turn on the backlight (p. 16). Horizontal stripes appear on the image. • This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction. This can be improved by changing the shutter speed (p. 28). The image appears divided horizontally. • This occurs when you light the subject using a flash. This can be avoided by using a shutter speed as slow as possible (p. 28). Black bands appear when you record a TV screen or computer screen. • This can be improved by adjusting the shutter speed (p. 28). Fine patterns flicker, diagonal lines look jagged. • Adjust [DETAIL] to the negative side (p. 34). The time code is not recorded in sequence. • The time code may not be recorded sequentially if you change the settings with [REC FORMAT]. 84 Playback Refer also to the “Memory card” section (p. 81). The desired images cannot be found. Images cannot be played back. • Select the memory card and image quality of the image you want to play back on the VISUAL INDEX screen (p. 41). • Image data cannot be played back if you have modified file names or folders, or have edited the data on a computer (When viewing still images, the file name flashes). This is not a malfunction (p. 96). • Images recorded on other devices may not be played back, or displayed in incorrect size. This is not a malfunction. The data file name is displayed incorrectly, or flashing. • The file is damaged. • The file format is not supported on your camcorder (p. 94). • Only the file name is displayed, if the folder structure does not conform to the universal standard. No sound or only a low sound is heard. • Turn up the volume (p. 43). • Movies recorded using [SMOOTH SLOW REC] do not have sounds. is displayed on the screen. • The memory card you are playing was recorded without setting the date and time. • Bars will be displayed for the camera data of the movies recorded with [SMOOTH SLOW REC] or [COLOR BAR] set to [ON]. • Bars will be displayed for the exposure correction value and flash information of the still images created with [PHOTO CAPTURE]. Multi Ch appears on the LCD screen. • This appears when you play back movies recorded with 5.1ch surround sound. 5.1ch surround sound is down-mixed to 2ch stereo and played back on your camcorder. Continued , 85 Troubleshooting Troubleshooting (Continued) Connecting to TV Neither image nor sound is played back on the TV connected with the component video cable. • Set [VIDEO OUT] according to the requirements of the connected device (p. 70). • When you are using the component video cable, make sure that you connect the red and white plugs of the A/V connecting cable (p. 47). Neither image nor sound is played back on the TV connected with the HDMI cable. • Pictures are not output from the HDMI OUT jack, if copyright protection signals are recorded in the pictures. • Signals are not output from the HDMI OUT jack when the USB jack is connected. Neither image nor sound is played back on the TV, projector, or AV amplifier connected with the HDMI cable. • If you cannot view images or hear sound on the TV, projector, or AV amplifier connected with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your camcorder again. The image appears distorted on the 4:3 TV. • This happens when viewing a movie recorded in 16:9 (wide) mode on a 4:3 TV. Select [REC/ OUT SET] —► [VIDEO OUT] —► [TV TYPE] —► the appropriate down conversion type (p. 70). Black zone appears at top and bottom of a 4:3 TV screen. • This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction. 86 Dubbing/Editing/Connecting to other devices Time code and other information appear on the display of the connected device. • Set [DISPLAY OUTPUT] to [LCD PANEL] while connected with the A/V connecting cable (p. 75). Dubbing cannot be done correctly using the A/V connecting cable. • The A/V connecting cable is not connected properly. Make sure that the A/V connecting cable is connected to the input jack of the other device for dubbing images from your camcorder. Sound cannot be added to the memory card after recording. • You cannot add sound to the memory card after recording on your camcorder. Dubbing cannot be done correctly using the HDMI cable. • You cannot dub movies using the HDMI cable. Connecting to a computer The computer does not recognize the camcorder. • Disconnect the cable from the computer, then connect it again securely. • Disconnect the cable from the computer, restart the computer, t...