Assessments - 3, GPA: 3.3
(
)
)
|
Fotos e especificações Sony DCR-TRV460E |
por este dispositivo também tem outras instruções :
Facilidade de uso
81). Displaying the date/time and camera settings data – Data code During playback, you can view the date/time data and the camera settings data ([CAMERA DATA]) that are automatically recorded while recording pictures on a tape or a “Memory Stick.” 1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode. 2 Touch during playback or playback pause. 3 Touch [DATA CODE]. If the item is not displayed on the screen, touch / . If you cannot find it, touch [MENU], and select it from the (STANDARD SET) menu. DATA CODE: OFF OFF 0:00:00:00 CAMERA DATA DATE/ TIME 60min 4 Select [CAMERA DATA] or [DATE/ TIME] then touch . 60min 0:00:00:00 AUTO AWB 100 0dB F3. 4 P-MENU To hide the date/time or the camera settings data Follow steps 2 and 3, and select [OFF] in step 4. Camera settings data display In the date/time data display, the date and time is displayed in the same area. If you record the picture without setting the clock, [-- -- ----] and [--:--:--] will appear. 0:00:00:0060min AWB 100 9dB F1.6 AUTO A SteadyShot off* B Exposure* C White balance* Playback D Gain* E Shutter speed F Aperture value * Appears only during tape playback b Notes • Camera setting data do not appear when movies on a “Memory Stick” are played back. • The data code function does not work with tapes recorded on other devices in the Hi8 /standard 8 mm system. z Tip • Exposure adjustment value (0EV) appears when a “Memory Stick” is played back. Playback Playback Playing the picture on a TV Connect your camcorder to a TV using the supplied A/V connecting cable as shown in the following illustration. Connect the supplied AC Adaptor to the wall socket for the power supply (p. 14). Refer also to the instruction manuals supplied with the devices to be connected. To copy to another tape, see page 87. Signal flow A/V jack A/V connecting cable (supplied) Yellow Red White S VIDEO jack * Pictures can be reproduced more faithfully by using an S video cable (optional). When there is an S video jack on the device to be connected, connect the S video plug to that jack instead of using the yellow video plug. The audio will not be output when you connect with the S video plug alone. When your TV is connected to a VCR Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE. When your TV is monaural (When your TV has only one audio input jack) Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural mode, use a connecting cable (optional) for that purpose. VCRs or TVs If your TV/VCR has a 21-pin connector (EUROCONNECTOR) Use the 21-pin adaptor supplied with your camcorder (For models with the mark printed on their bottom surfaces only). This adaptor is designed for output use only. TV/VCR Playback Locating a scene on a tape for playback Searching quickly for a desired scene – Zero set memory m REW PLAY STOP DISPLAY ZERO SET MEMORY 1 During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later on. The tape counter is reset to “0:00:00” and appears on the screen. 0:00:0060min P-MENU 20 If the tape counter is not displayed, press DISPLAY on the Remote Commander. 2 Press (stop) when you want to stop playback. 3 Press m REW. The tape stops automatically when the tape counter reaches “0:00:00.” 4 Press PLAY. The playback starts from the point designated “0:00:00” on the tape counter. To cancel the operation Press ZERO SET MEMORY on the Remote Commander again. b Notes • There may be a discrepancy of several seconds between the time code and the tape counter. • Zero set memory will not function correctly if there is a blank section between recorded sections on the tape. • The zero set memory function does not work with tapes recorded on other devices in the Hi8 / standard 8 mm system. Searching for a scene by date of recording – Date search You can locate the point where the recording date changes. SEARCH M. . / > STOP 1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode. 2 Press SEARCH M. on the Remote Commander repeatedly to select [DATE SEARCH]. Playback ,continued Playback 3 Press . (previous)/> (next) on the Remote Commander to select a recording date. Playback starts automatically from the point where the date changes. Each time you press the button, the previous or the next date will be searched for and displayed. To cancel the operation Press STOP on the Remote Commander. b Notes • If one day’s recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes. • The Date search will not function correctly when there is a blank section between recorded sections on the tape. • The date search function does not work with tapes recorded on other devices in the Hi8 /standard 8 mm system. Playback BAdvanced operations Us...
Este manual também é adequado para os modelos :Câmaras de vídeo - DCR-TRV461E (3.08 mb)