Log:
Assessments - 1, GPA: 4 ( )

Instruções de Operação Samsung, Modelo HMX-W300BP

Fabricante : Samsung
Arquivo Tamanho: 9.34 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Check the water-proof seals before taking the product into water. Samsung is not responsible for any loss caused by mishandling the product or leakage from deteriorated sealing. For the damaged water-proof seal, consult your Samsung service centre. (Extra charges may be added.) Before using the product under/near water Caring for water/dust/shock-proof capability Before using the product under/near water • Make sure to remove sand, hair, and other foreign substances from the product, and keep the lens glass clean. • If you find foreign substances or water around the memory card/HDMI jack cover or USB plug cover, wipe it off with a soft, clean cloth that leaves no fabric dust. Even a very small amount of a foreign substance may cause damage or let water enter the product. • Make sure the water-proof seal in the cover is undamaged. A damaged seal can damage or let water enter the product. If the seal is damaged, contact your nearest Samsung Service Centre for • a replacement. • Do not open or close the memory card/HDMI jack cover or USB plug cover with wet or dirt/sand-covered hands. Also avoid opening the covers near water. It may introduce water or other foreign substances into the product. • Use the underwater mode to ensure the optimal condition for under water recording. ^page 40 • Close the memory card/HDMI jack cover and USB plug cover. Make sure they click when you close them. If they do not click, they are not closed. • Do not open or close the memory card/HDMI jack cover or USB plug cover while on the beach or near water. Caring for water/dust/shock-proof capability Using the product under/near water • Do not use the product in water depths exceeding 5m (about 16.4 ft.). • Do not use the product underwater for longer than 1 hour. • Do not open the memory card/HDMI jack cover or USB plug cover underwater. • Do not use the product in hot water, such as a hot spring. • Do not expose the product to strong vibration, shock, or pressure. - Do not jump or dive into water holding the product. - Do not use the product in strong water flows such as in rapids or under waterfalls. The strong water pressure may impair the water-proof performance or cause a malfunction. • Do not place the product near sand. Sand can enter the speaker and microphone. • Do not expose to direct sunlight for a long time. The product can overheat. • Do not poke the speaker or microphone of the product with any sharp object. Water-proof performance will be degraded. • If the product is splashed by substances such as sunscreen, tanning oil, or soap, wipe off immediately. The substances may impair the water-proof performance or cause discolouration. • Be careful not to get dirt, lint, and foreign substances to the internal microphone when using the product. Caring for water/dust/shock-proof capability Cleaning after using the product under/near water After using the product in water, rinse to remove foreign substances or salt from the product within 1 hour. 1 Immerse the product in clean water for 2~3 minutes, and then gently shake it in the water to rinse it. • Hold the product with the cleaned part facing down, and then gently shake the product. 3 Dry the product completely in a well ventilated and shaded area. 2 Remove the product from the water, and then wipe the water droplets off the product with a soft and dry cloth. Bubbles may appear when the product is soaking in water. This is not a malfunction. If the product is not rinsed completely, the water-proof performance may deteriorate. Press each button of the product to remove salt or other foreign substances between/around the buttons. Do not use chemicals to clean the product including soap, neutral detergent or alcohol. You can damage the product's water-proof capability. This product is designed to drain well. The water drains through the small holes around the buttons on the product. Do not use a device such as a hair dryer to dry the product. The waterproof performance may deteriorate or the appearance of the product can be transformed. Do not open the memory card/HDMI jack cover and the USB plug cover until the product has dried out. If there is water on this product, wipe it off with a soft and dry cloth until it is completely dry. After using the product under/near water, dry the internal microphone and speaker of the product completely. Not doing so may decrease the audio quality during video recording or playback. Do not poke the speaker or microphone of the product with any sharp object. Water-proof performance will be degraded. Before reading this user manual SAFETY WARNINGS What the icons and signs in this user manual mean: Safety Icon Meaning & WARNING There is a potential risk of death or serious injury. ® CAUTION There is a potential risk of personal injury or damage to the product. m To reduce the risk of fire, explosion, electric shock, or personal injury when using your product, follow these basic safe...

Este manual também é adequado para os modelos :
Câmaras de vídeo - HMX-W300RP (9.34 mb)
Câmaras de vídeo - HMX-W300YP (9.34 mb)
Câmaras de vídeo - HMX-W350BP (9.34 mb)
Câmaras de vídeo - HMX-W350RP (9.34 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias