Assessments - 2, GPA: 3.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
approx. 230min. approx. 230min. SDHC/ MMCplusContinuous recording time approx. 120min. approx. 125min. approx. 130min. Playback approx. 230min. approx. 230min. approx. 230min. time -The time is only for reference. Figures show above are measured under Samsung's test environment, and may differ from users and conditions. Continuous Recording (without zoom) The continuous recording time of memory camcorder in the table shows the available recording time when the memory camcorder is in the recording mode without using any other function after recording started. In actual recording, the battery pack may discharge 2-3 times faster than this reference since the record start/stop and zoom are being operated, and playback is performed. Assume that the recordable time with a fully charged battery pack is between 1/2 and 1/3 of the time in the table, and prepare type and number of battery packs to allow for the time you are planning to record on the memory camcorder. Note that the battery pack discharges faster in cold environment. The charging time will vary depending on the remaining battery level. English_15 preparation To check the remaining battery charge • When the camcorder is turned off (battery is installed) press and release the button to display the remaining capacity of the battery capacity. • When the camcorder is turned on (battery is installed) press and hold the button for more than 2-3 seconds to display the remaining battery capacity. Press the button again or any other button to return to the initial OSD while the battery information is displayed. • When the battery is installed and the AC adapter is connected, if you press button, the remaining battery capacity is displayed. • When the AC adapter alone is connected, pressing the button will display "No Battery" message. 154 Min Battery 60 Min Memory (Super Fine) 120 Min 0% 50% 100% Remaining battery(approx.) Recording capacity (approx.) 16_English Battery Level Display The Battery Level Display shows the amount of battery power remaining in the battery pack. Battery Level IndicatorStateMessageFully charged - 20~40% used - 40~60% used - 60~80% used - 80~95% used - Exhausted(flickers): The device will soon turn off. Change the Battery Pack as soon as possible. - (flickers): The device will be forced to turn off after 5 seconds. "Low battery" STBY 00:00:00/00:58:00 120 M N English_17 preparation Charging the Battery Pack The IA-BP85ST battery pack provided with this memory camcorder may be charged a little at purchase time: Charge it before using the memory camcorder. • Use IA-BP85ST battery pack only. • The battery pack may be charged a little at the time of purchase. 1. Slide the POWER switch downward to turn off the power. 2. Insert the battery pack. 3. Open the LCD screen and jack cover. 4. Connect the AC power adapter to the DC IN jack of your memory camcorder. 5. Connect the AC power adapter to a wall socket. • The charging indicator will start to blink, showing that the battery pack is charging. 6. When the battery pack is fully charged, disconnect the AC power adapter from the memory camcorder. Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC power adaptor. • Do not use the AC adaptor placed in an enclosed space, such as between a wall and furniture. CAUTION • Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in camcorder malfunction. • Use the nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder. 54132 18_English Charging indicator Tips for battery identification • The colour of the LED indicates charging status. - If the battery has been fully charged, the charge indicator is green. If you are charging the battery, the colour of the charge indicator is orange. The charge indicator flickers if the battery is abnormal. Colour Charging state Orange On Charging Green Fully Charged Using a household power source Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case. Using memory camcorder with AC power adaptor It is recommended that you use the AC power adaptor to power the memory camcorder from a household AC outlet when you perform settings on it, play back, or use it indoors. -Make the same connections as you do when charging the battery pack. .page 18 • Be sure to use the specified AC power adaptor to power the memory camcorder. Using other AC power adaptors could cause electric shock or result in fire. • The AC power adaptor can be used around the world. An AC plug adaptor is required in some foreign countries. If you need one, purchase it from your distributor. English_19 BUTTON TYPE BATTERY INSTALLATION 1.Insert the button type battery in the battery slot on the bottom of the memory camcorder. 2.Position the b...
Este manual também é adequado para os modelos :Câmaras de vídeo - VP-MX10 (4.97 mb)
Câmaras de vídeo - VP-MX10AH (4.97 mb)
Câmaras de vídeo - VP-MX10AU (4.97 mb)
Câmaras de vídeo - VP-MX10H (4.97 mb)