Assessments - , GPA: ( )

Instruções de Operação Samsung, Modelo I85-B

Fabricante : Samsung
Arquivo Tamanho: 14.99 mb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

por este dispositivo também tem outras instruções :

Câmaras de vídeo - I85-B (26.6 mb)

Câmaras de vídeo - I85-B (15.74 mb)

Câmaras de vídeo - I85-B (15.47 mb)

PMP Approx. 300 MIN Using the fully charged battery . These figures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods. Important information about battery usage. . When the camera is not used, turn off the camera power. . Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. . Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. . Batteries will usually recover at normal temperatures. . During extended use of the camera, the camera body may become warm. This is perfectly normal. . When you use earphones, do not remove the battery while the camera is turning on. It may generate a loud noise. C CCCo oon nnn nne eec cct tti iin nng gg t tto oo a aa p ppo oow wwe eer rr s sso oou uur rrc cce ee You can charge the rechargeable battery (SLB-1137D) by using the SAC-46 KIT which consists of the AC adapter (SAC-46) and the USB cable (SUC-C2). When the SAC-46 and SUC-C2 are combined, they can be used as an AC cable. . Using an AC cable: Connect the AC adapter to the USB cable. It can be used as a power cable. . Using a USB cable: Remove the AC adapter (SAC-46). You can download stored images to your PC (p.118) or supply the power to your camera through the USB cable. Important information about USB cable usage. . Use a USB cable (SUC-C2) with the correct specification. . If the camera is connected to the PC through a USB hub : connect the camera directly to the PC. . If the camera and other devices are connected to the PC at the same time : remove other device. . If the USB cable is connected to a port located on the front of the PC : remove the cable and connect it to a port located on the back of the PC. . If the USB port of the PC doesn’t meet the Power output standard (5V, 500mA), the camera may not be charged. C CCCo oon nnn nne eec cct tti iin nng gg t tto oo a aa p ppo oow wwe eer rr s sso oou uur rrc cce ee . How to charge the rechargeable battery (SLB-1137D) . Charging LED of the AC Adapter Charging LED Being Charged Red LED is on Charging is complete Green LED is on Charging error Red LED is off or blinking Being discharged (Using the AC adapter) Orange coloured LED is on – If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. This is because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera. – Do not use the flash frequently or take a movie clip with the fully discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again. . Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. . If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly. . If you charge the battery with the camera power on, the battery can’t charge fully. Turn the camera off while charging the battery. C CCCo oon nnn nne eec cct tti iin nng gg t tto oo a aa p ppo oow wwe eer rr s sso oou uur rrc cce ee Insert the battery as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover. . There are 4 indicators for battery condition that are displayed on the LCD monitor. I IIn nns sse eer rrt tti iin nng gg t tth hhe ee m mme eem mmo oor rry yy c cca aar rrd dd Insert the memory card as shown. -Turn off the camera’s power before inserting the memory card. -Have the front of the memory card facing toward the back of the camera (LCD monitor) and the card pins toward the front of the camera (Lens). -Do not insert the memory card the wrong way round. Doing so may damage the memory card slot. Battery indicator Battery status The battery is fully charged Low battery capacity (Prepare to recharge or use spare battery) Low battery capacity Prepare to recharge or use spare battery) Battery empty. Recharge or use spare battery. I IIIn nns sst ttr rru uuc cct tti iio oon nns ss o oon nn h hho oow ww t tto oo u uus sse ee t tth hhe ee m mme eem mmo oor rry yy c cca aar rrd dd . Be sure to format the memory card (see p.61) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. . Turn off the camera power whenever the memory card is being inserted or removed. . Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on t...