Assessments - 5, GPA: 3.6
(
)
)
|
Fotos e especificações Canon VIXIA HF M50 |
Facilidade de uso
Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply • Is the battery charged? Is the compact power adapter correctly connected to the camcorder? (A21) Recording • Did you turn the camcorder on and correctly set it to a recording mode? (A45, 89) If you are recording on a memory card, is one correctly inserted into the camcoder? (A39) Playback • Did you turn the camcorder on and correctly set it to playback mode? (A54, 132) If you are playing back recordings from a memory card, is one correctly inserted into the camcorder? (A39) Does it contain any recordings? Other • Does the camcorder make a rattling sound? The internal lens fixture can move when the camcorder is turned off or in a playback mode. This is not a malfunction. Power source The camcorder will not turn on or it turns off by itself. -The battery pack is exhausted. Replace or charge the battery pack. -Remove the battery pack and reattach it correctly. -When the recording program is set to [Underwater] or [Surface], the camcorder may turn off automatically if it becomes too hot. Turn off the camcorder and let it cool down. The camcorder turns off without the battery warning indicator appearing on the screen. -The battery charge has become low or the battery pack is exhausted. Replace or charge the battery pack. Additional Information .. 203 Cannot charge the battery pack. -Make sure the camcorder is off so charging can start. -The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again. -Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and 104 °F). -The battery pack is faulty. Replace the battery pack. -The camcorder cannot communicate with the battery pack attached. Battery packs not rec ommended by Canon for use with this camcorder cannot be charged using this camcorder. -If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. A noise can be heard from the compact power adapter. -A faint sound can be heard while the compact power adapter is connected to a power outlet. This is not a malfunction. The battery pack is exhausted extremely quickly even at normal temperatures. -The battery may have reached the end of its battery life. Buy a new battery pack. Recording Pressing Y will not start recording. -You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. -The memory is full or it already contains the maximum number of scenes of AVCHD movies (3,999 scenes). Delete some recordings (A60, 134) or initialize the memory (A41) to free some space. The point where Y was pressed does not match the beginning/end of the recording. -There is a slight interval between pressing Y and the actual start/end of recording. This is not a malfunction. The camcorder will not focus. -Autofocus does not work on the subject. Focus manually (A108). -The lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-cleaning cloth (A227). Never use tissue paper to clean the lens. When a subject flits across in front of the lens, the image appears slightly bent. -This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the camcorder, the image may seem slightly warped. This is not a malfunction. 204 • Additional Information Changing the operating mode between recording (U)/record pause (U)/playback (.) takes longer than usual. -When the memory contains a large number of scenes, some operations may take longer than usual. Save your recordings (A146) and initialize the memory (A41). Movies or photos cannot be recorded properly. -This may occur as movies and photos are recorded/deleted over time. Save your recordings (A146) and initialize the memory (A41). Cannot record a photo while recording movies. -You cannot take photos in mode, while the digital zoom is activated (A50) or while fading in or fading out a scene (A103). After using the camcorder for a long time, it becomes hot. -The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Cannot create a new story. -A memory can contain a maximum of 98 user-created stories. Delete some stories from the gallery (A63) or select a different memory (A40). Playback Cannot copy/move scenes in a story. -The memory is full. Delete some recordings (A60, 134) to free some space. Cannot delete a scene. -You may not be able to delete scenes recorded or edited using another device. Deleting scenes takes longer th...