Assessments - 5, GPA: 3.6
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
(Forward x2 Playback)/(Reverse x2 Playback) Plays back at 2 times the normal speed. Press the button on the wireless controller during normal or reverse playback. Press the PLAY button on the wireless controller or push the joystick ( ) towards / to return to normal playback. • There is no sound during special playback. • The picture may become distorted during some special playback modes. • The camcorder stops the tape automatically after 4 minutes 30 seconds in playback pause mode to protect the tape and video heads. Playing Back a Memory Card E 1. Holding the lock button on the switch pressed down, set the switch to PLAY. 2. Set the TAPE/CARD switch to . 3. If the joystick guide does not appear on screen, press ( ) to display it. 4. Push the joystick ( ) to move between images. To play back a movie on the memory card: 5. Push the joystick ( ) towards / . Basic Functions Playback • Push the joystick ( ) towards / again to pause/resume the playback. • Push the joystick ( ) towards to During playback stop the playback. • When the movie playback ends or is stopped, the first frame of the movie appears as a still image. • Push the joystick ( ) towards or or press the REW /FF button on the wireless controller for 8x fast forward/fast rewind playback. • Images not recorded with this camcorder, uploaded from a computer (except the sample images 61), edited on a computer and images whose file names have been changed may not be played back correctly. • Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the CARD access indicator is flashing. Doing so could result in data damage. 39 Adjusting the Volume When you use the LCD screen for playback, the camcorder plays back the sound using the built-in speaker. The sound will be muted when the LCD panel is closed. Available in the and modes. Joystick Speaker FUNC. button ( 63) SPEAKER VOLUME 1. Press the FUNC. button to open the FUNC. menu. 2. With the joystick select ( ) the speaker volume icon. 3. Adjust ( ) the volume as required. 4. Press the FUNC. button to save the setting and close the menu. If you turn off the volume completely the volume display will change to “ ”. When the stereo video cable is connected to the AV terminal, the speaker sound will be muted. Playing Back on a TV Screen Selecting the Type of TV During playback, set the [TV TYPE] option according to the TV set to which you connect E the camcorder. Available only in the mode. MENU ( 63) VCR SETUP TV TYPE WIDE TV 1. Press the FUNC. button to open the FUNC. menu. 2. With the joystick select ( ) the ). 3. Select ( ) the [VCR SETUP] menu and press ( ). Then, select ( ) the [TV TYPE] option and press ( ). 4. Select a setting option and press ( ) to save the changes. • [WIDE TV]: TV sets with 16:9 aspect ratio. • [NORMAL TV]: TV sets with 4:3 aspect ratio. 5. Press the FUNC. button to close the menu. TVs with SCART Terminal Refer also to the TV or VCR instruction manual. 1. Turn off all devices before starting the connections. 2. Connect the PC-A10 SCART Adapter to the TV or VCR’s terminals. STV-250N Stereo Video Cable (supplied) PC-A10 SCART Adapter Signal flow Open the terminal cover Basic Functions Playback 41 3. Connect the stereo video cable to the camcorder’s AV terminal and the terminals on the SCART Adapter. Connect the white plug to the white AUDIO terminal L (left), the red plug to the red AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal. 4. If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. The supplied PC-A10 SCART Adapter is for output only. For analog line-in recording or analog-digital conversion, please use a SCART Adapter with input capability (commercially available). TVs without SCART terminal Refer also to the TV or VCR instruction manual. VIDEO AUDIO R L INPUT STV-250N Stereo Video Cable (supplied) Open the terminal cover Signal flow 1. Turn off all devices before starting the connections. 2. Connect the stereo video cable to the camcorder’s AV terminal and the audio terminals on the TV/VCR. Connect the white plug to the white AUDIO terminal L (left), the red plug to the red AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal. 3. If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. • We recommend powering the camcorder from a household power source. • When the stereo video cable is connected to the AV terminal, the speaker sound will be muted. Using the Recording Programs E Advanced Functions Recording Programs Easy mode The camcorder adjusts focus, exposure and other settings automatically, allowing you to just point and shoot. Program AE ( 46) In Program AE mode, you can point and shoot as in Easy mode, however, you have the option of changing some settings. Portrait The camcorder uses a large aperture, achi...
Este manual também é adequado para os modelos :Câmaras de vídeo - MVX450 (3.87 mb)