Assessments - , GPA: ( )

Instruções de Operação Canon, Modelo EF 35mm f/1.4L USM

Fabricante : Canon
Arquivo Tamanho: 1.7 mb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Using black and white infrared film with a different sensitivity may require a slightly different setting. Thus, it is recommended to take trial shots with the focusing ring set slightly to the left and then right of the appropriate index to find the best position. • Be sure to observe the manufacturer’s instructions when using infrared film. 7. Filter (sold separately) The filter screws onto the front of the lens. • If you need a polarizing filter, use Canon’s PL-C polarizing filter. Filter holder for the EF14mm f/2.8L USM This lens is constructed with a built-in, gelatin filter holder in the rear .. . To insert, simply cut the filter to the same dimensions (31 mm/1-1/4” . 31 mm/1-1/4”) as the white brackets, then slide the filter into the holder. 8. Hood The hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. Engage the hood attachment tabs on the lens with the tabs on the hood and turn the hood in the direction of the arrow to secure it to the lens. [Bayonet type] EF20mm f/2.8 USM, EF28mm f/1.8 USM and EF50mm f/1.4 USM (sold separately), and EF24mm f/1.4L USM and EF35mm f/1.4L USM (supplied with the lens). To fit the hood on the EF20mm f/2.8 USM, EF24mm f/1.4L USM, EF28mm f/1.8 USM or EF35mm f/1.4L USM, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood clockwise until the lens’s red dot is aligned with the hood’s stop position mark .. . When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. Though there is no red dot on the hood for the EF50mm f/1.4 USM (ES-71II), the attachment procedure is the same. • Part of the picture may be blocked if the hood is not attached properly. • The hood can be reverse-mounted on the lens for storage. [Clip-on type] EF85mm f/1.8 USM, EF100mm f/2 USM (sold separately) Press the buttons on both sides of the hood to attach as illustrated .. . [Cut-in type] .. Fixed type EF14mm f/2.8L USM The hood and lens are a single unit. .. Pull-out type EF200mm f/2.8L USM Pull the hood out from the front of the lens to use .. . The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the lens cap and dust cap. The size and weight listed are for the lens only, except as indicated. Product specifications and appearance are subject to change without notice. Nomenclature .... Distance scale .... Infrared index .... Distance index .... Contacts .... Lens mount index .... Focus mode switch .... Focusing ring EF14mm f/2.8L USM EF20mm f/2.8 USM EF24mm f/1.4L USM EF28mm f/1.8 USM EF35mm f/1.4L USM EF50mm f/1.4 USM EF85mm f/1.8 USM EF100mm f/2 USM EF200mm f/2.8L USM Objectifs EF Mode d’emploi Nomenclature .... Echelles des distances .... Repere infrarouge .... Repere des distances .... Contacts .... Repere de montage d’objectif .... Selecteur de mode de mise au point .... Bague de mise au point ...