Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• If you center on the light and dark contrasting area of the subject and push the shutter button halfway, or repeatedly push the shutter button halfway, the AF frame will appear and the camera will focus. Subject is too dark. • Set the flash to h(p. 85). • Correct the brightness with exposure compensation (p. 85). • Adjust the image with i-Contrast (pp. 89, 149). • Use spot metering or AE Lock to shoot (pp. 101, 102). Subject is too bright (overexposed). • Set the flash to !(p. 54). • Correct the brightness with exposure compensation (p. 85). • Use spot metering or AE Lock to shoot (pp. 101, 102). • Reduce the light illuminating the subject. Image is dark even though the flash fired (p. 27). • Shoot within an appropriate distance for flash photography (p. 85). • Increase the ISO speed (p. 88). Image taken using the flash is too bright (overexposed). • Shoot within an appropriate distance for flash photography (p. 85). • Set the flash to !(p. 54). White dots appear on the image when shooting with the flash. • Light from the flash has reflected off dust particles or other objects in the air. Image appears rough or grainy. • Shoot with the ISO speed on a lower setting (p. 88). • Depending on the Shooting mode, when shooting in a high ISO speed the image may appear rough or grainy (pp. 65, 66). Eyes appear red (p. 104). • Set the [Red-Eye Lamp] to [On] (p. 171). When shooting with the flash, the lamp (on the front of the camera) lights (p. 42), and for approximately 1 second while the camera is reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. • Correct images with red-eye correction (p. 150). 182 Troubleshooting Recording images to the memory card takes a long time, or continuous shooting slows down. • Perform a low-level format of the memory card in the camera (p. 165). Cannot make settings for shooting functions or FUNC. menu. • The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 192 – 197). Shooting Movies Correct shooting time does not display, or stops. • Format the memory card in the camera, or use a memory card capable of recording at high speeds. Even when the shooting time does not display properly, the recorded video will be the length that it was actually shot (pp. 23, 32). appeared on the screen and shooting ended automatically. The camera’s internal memory was insufficient. Try one of the following: • Perform a low-level format of the memory card in the camera (p. 165). • Change the image quality setting (p. 116). • Use a memory card capable of recording at high speeds (p. 116). Subject appears distorted. • The subject may appear distorted if it passes quickly in front of the camera while shooting. Playback Cannot play back images or movies. • If the file name or folder structure is changed on a computer, you may not be able to play back images or movies. Refer to the Software Guide for information regarding folder structure or file names. Playback stops, or audio cuts out. • Use a memory card that has had a low-level format performed on it with this camera (p. 165). • If you copy a movie to a memory card that reads slowly, playback may interrupt momentarily. • Depending on its capabilities, when playing movies on a computer, frames may drop or the audio may cut out. Screen Touch operations do not work as expected. • Since the camera uses a pressure sensitive touch panel, try touching the screen slightly harder or use the toggle attached to the strap (p. 14). • Calibrate the touch panel (p. 170). appears on the upper right of the screen. • You are touching the upper right part of the screen. Take your finger off the screen. 183 List of Messages That Appear on the Screen Computer Cannot transfer images to a computer. It may be possible to solve the problem when the camera is connected to a computer via cable by reducing the transfer speed. • Turn off the camera. Keep the shutter button pressed fully and move the zoom lever toward i, then press the 1 button. Now move the zoom lever toward j. Touch [B] in the screen that appears, then touch it again. Eye-Fi Card Cannot transfer images (p. 179). List of Messages That Appear on the Screen If error messages appear on the screen, try one of the following solutions. No memory card • The memory card is not installed in the correct direction. Install the memory card in the correct direction (p. 18). Memory card locked • The SD memory card, SDHC memory card, SDXC memory card or Eye-Fi card’s write protect tab is set to “LOCK”. Unlock the write protect tab (p. 17). Cannot record! • You attempted to shoot an image without a memory card. Install the memory card in the correct direction to shoot (p. 18). Memory card error (p. 165) • If the same message appears even when a for...