Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder or change the POWER switch position. POWER switch Getting Started 1 While pressing the green button, turn the POWER switch repeatedly in the direction of the arrow until the respective lamp lights up. (Movie): To record movies (Still): To record still images The [CLOCK SET] screen appears. 2 Select the desired geographical area with v/V, then touch [NEXT]. 3 Set [SUMMERTIME], then touch [NEXT]. Continued , 23 Step 3: Turning the power on, and setting the date and time (Continued) 4 Set [Y] (year) with v/V. 5 Select [M] with b/B, then set the month with v/V. 6 Set [D] (day), hour and minute in the same way, then touch [NEXT]. 7 Make sure that the clock is correctly set, then touch . The clock starts. You can set any year up to the year 2037. To turn off the power Turn the POWER switch to OFF (CHG). To reset the date and time Select (HOME) t (SETTINGS) t [CLOCK/ LANG] t [CLOCK SET], and set the date and time. b Notes • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable battery and then set the date and time again (p. 107). • It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time. • The lens cover opens automatically when the power is turned on. It closes when the playback screen is selected, or the power is turned off. • In the setting at the time of purchase, the power turns off automatically if you leave your camcorder without any operation attempted for approximately 5 minutes, to save battery power ([A.SHUT OFF], p. 73). z Tips • The date and time does not appear during recording, but they are automatically recorded on the disc, and can be displayed during playback (see page 69 for [DATA CODE]). • Refer to page 100 for information concerning “World time difference.” • If the buttons on the touch panel do not work correctly, adjust the LCD screen ([CALIBRATION], p. 106). Changing the language setting You can change the on-screen displays to show messages in a specified language. Touch (HOME) t (SETTINGS)t[CLOCK/ LANG]t[ LANGUAGE SET], then select the desired language. Step 4: Preparing for recording LCD panel Open the LCD panel 90 degrees to the camcorder (1), then rotate it to the best angle to record or play (2). 190 degrees to the 290 degrees camcorder (max.) DISP/BATT INFO 2180 degrees (max.) To turn off the LCD backlight to make the battery last longer Press and hold DISP/BATT INFO for a few seconds until appears. This setting is practical when you use your camcorder in bright conditions or you want to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/ BATT INFO for a few seconds until disappears. b Notes • Do not press the buttons on the LCD frame when you open or adjust the LCD panel. z Tips • If you open the LCD panel 90 degrees to the camcorder, then rotate it 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out. This is convenient during playback operations. • On the HOME MENU, touch (SETTINGS) t [SOUND/DISP SET] t [LCD BRIGHT] (p. 70) to adjust the brightness of the LCD screen. • The information is displayed or hidden (display y no display) each time you press DISP BATT/INFO. Viewfinder You can view images using the viewfinder to avoid wearing down the battery, or when the image seen on the LCD screen is poor. Viewfinder Getting Started Viewfinder lens adjustment lever Move it until the image becomes clear. z Tips • You can adjust the brightness of the viewfinder backlight by selecting (SETTINGS) t [SOUND/DISP SET] t [VF B.LIGHT] on the HOME MENU (p. 71). 25 26 Step 5: Inserting a disc or a “Memory Stick Duo” A new 8 cm DVD-RW, DVD+RW, DVDR, or DVD+R DL is required for recording (p. 12). b Notes • Remove dust or fingerprints from the disc beforehand, using a soft cloth (p.102). 1 Check that the power of your camcorder is on. 2 Turn the disc cover OPEN switch in the direction of the arrow (OPEN B). [PREPARING TO OPEN] appears on the LCD screen. The disc cover slightly opens automatically. 3 Set the disc with the recording side facing your camcorder, then press the center of the disc until it clicks. 4 Close the disc cover. [DISC ACCESS] appears on the LCD screen. It may take some time for the camcorder to recognize the disc. xDVD-RW/DVD+RW A window appears to ask whether you will use [DISC SELECT GUIDE]. Using [DISC SELECT GUIDE] lets you format the disc by following the guidance on the screen. If you do not want to use it, proceed to step 5. xDVD-R/DVD+R DL You can start recording immediately after [DISC ACCESS] disappears from the LCD screen. You do not need to proceed to steps after step 5. 5 Touch the option that is right for you on the scre...
Este manual também é adequado para os modelos :Câmaras de vídeo - DCR-DVD406E (6.36 mb)
Câmaras de vídeo - DCR-DVD506E (6.36 mb)
Câmaras de vídeo - DCR-DVD508E (6.36 mb)
Câmaras de vídeo - DCR-DVD808E (6.36 mb)