Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 1.14 mb Arquivo Nome : Língua de Ensino:

5 2 Your camcorder Introduction With this portable camcorder, you can: take f • ull HD (1080P) or VGA movies • take pictures • play recorded movies or pictures either directly or on the large screen of a connected TV • upload the recorded movies or pictures to the Internet directly via your PC/Mac What’s in the box Make sure that the following items are packed in the box: • Camcorder • Quick start guide • Pouch • Hand strap Note •• The safety logo and power rating information are located at the USB arm of the camcorder. Always bring your product to a professional to remove the built-in battery. EN Functional overview a b c d e f g h a Display panel b • In viewfinder mode, switch to play mode. • In play mode, play a selected video clip. • Confirm settings. c / • Navigate left/right in a menu. • Select a menu option. • In play mode, turn to the previous/ nex t picture/video clip. • ( ) In viewfinder mode, switch to the scene selection window. • ( ) In viewfinder mode, switch to the settings menu. pqr ijklmn e o • Navigate up/down in a menu. • Change a value in the settings menu. • During video play, change the volume. • Per form the specific function as shown on the display panel. Shutter button • In viewfinder mode, take a picture or star t/stop video recording. • In play mode, switch to viewfinder mode. f USB connector g • Eject the USB connector. h Tripod socket d +/-i Hand strap hole • In viewfinder mode, zoom in/out. 6 EN j HDMI • Connect to a T V through an HDMI 3 Get started cable with a mini HDMI connector (type C). Load the Micro SD card k MICRO SD • Connect a Micro SD card. l RESET • Restore default settings. m • Turn on/off the camcorder. n Mode switch button • Switch between picture and video recording modes. o Built-in speaker p Built-in microphones q Flashlight r Lens 1 Flap open the protective cover on the Micro SD card socket. 2 Inser t a Micro SD card (not supplied) into the socket. • Make sure that the the Micro SD card is not write-protected. • Make sure that the metal contact of the card faces down. 3 Close the protective cover securely. Turn on • Press . » For first-time users, a menu for OSD language selection is displayed (See ‘’Get star ted - Set the OSD language). » The camcorder switches to viewfinder mode. EN 7 To turn off the camcorder: • Press and hold . » The backlight on the display panel turns off. Tip • To save energy, the camcorder turns off automatically af ter being idle for 3 minutes. First-time setup When you turn on the camcorder for the first time, a menu for OSD language selection is displayed. 1 Press +/- to select a language. 2 Press to confirm. » A welcome message is displayed briefly. » An inquiry box for date and time setting is displayed. 3 Press to highlight [Yes]. » A date setting menu is displayed. 4 Press / to select the day, month and year fields successively. 5 Press +/- to change the value of each field. 6 Press to confirm the date setting. » A time setting menu is displayed. 7 Press / to select the hour and minute fields successively. 8 Press +/- to change the value of each field. 9 Press to confirm the time setting. » The first-time setup is complete. » The camcorder enters viewfinder mode. Tip • See ‘Use your camcorder - Adjust settings’ for more set tings. Select a scene 1 In viewfinder mode, press to enter the window for scene selection. 2 Press +/- to select a scene. 3 Press to confirm and go back to viewfinder mode. • Or press to cancel and go back to viewfinder mode. Charge the built-in battery 1 Press at the bottom of the camcorder to eject the USB connector. 2 Connect the USB connector to a USB socket on a PC. » The status indicator on the shutter button star ts flashing in orange. 3 Wait until the status indicator stops flashing and turns to green steadily. » The built-in batter y is fully charged. Tip • The camcorder is fully charged for first-time use. • It takes about 3 hours to fully charge the built-in bat ter y via the PC . 8 EN You can also charge the camcorder via a USB adaptor (not supplied) connected to mains power. The charge time is about 2 hours. UKEUR 4 Use your camcorder Record video 1 Switch the mode switch button to . » The selected resolution and remaining recording time are displayed on the display panel. 2 Hold the camcorder steadily and aim the lens as needed. 3 Press the shutter button to star t recording. » A red time indicator is displayed on the display panel. » The status indicator on the shutter button star ts flashing in red. 4 Press the shutter button again to end recording. » [Recording saved!] is displayed briefly. Take pictures 1 Switch the mode switch button to . » The file size and remaining number of pictures that can be taken are displayed on the display panel. 2 Hold the camcorder steadily and aim the lens as needed. 3 Press the shutter button down halfway to adjust the focus. 4 Press the shutter button down completely to take a picture. » [Picture saved!] is displayed briefly. EN 9 Play 1 In viewfinder mode,...

Baixe o seu

Para fazer o download, introduza 2 dígitos :