Assessments - 4, GPA: 4.3
(
)
)
|
Fotos e especificações Sony DCR-HC20E |
por este dispositivo também tem outras instruções :
Câmaras de vídeo - DCR-HC20E (4.16 mb)
Câmaras de vídeo - DCR-HC20E (2.68 mb)
Câmaras de vídeo - DCR-HC20E (2.72 mb)
Facilidade de uso
This is not a malfunction. cFully charge the battery again. If the problem persists, replace the battery pack with a new one. It may be damaged. (p. 12, 83) Troubleshooting Symptom Cause and/or Corrective Actions The remaining battery time indicator does not indicate the correct time. • The temperature of the environment is too high or too low, or the battery pack has not been charged enough. This is not a malfunction. cFully charge the battery again. If the problem persists, replace the battery pack with a new one. It may be damaged. (p. 12, 83) The power turns off frequently although the remaining battery indicator indicates that the battery pack has enough power to operate. • A problem has occurred in the remaining battery time indicator, or the battery pack has not been charged enough. cFully charge the battery again to correct the indication. (p. 12) The power abruptly turns off. • [A.SHUT OFF] in the (OTHERS) menu is set to [5min]. (p. 59) cWhen approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off. Slide the POWER switch down to turn the power on again. (p. 15) Or use the AC Adaptor. A problem occurs when the camcorder is connected to the AC Adaptor. cTurn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it again. Cassette tapes Symptom Cause and/or Corrective Actions Cassette cannot be ejected from the compartment. cMake sure the power source (battery pack or AC Adaptor) is connected correctly. (p. 12) cRemove the battery pack from the camcorder, then attach it again. (p. 12) cAttach a charged battery pack to the camcorder. (p. 12) Cassette is not ejected even when the cassette lid is open. • Moisture condensation is starting in your camcorder. (p. 86) The Cassette Memory indicator does not appear while using a cassette with Cassette Memory. cClean the gold-plated connector of the cassette. (p. 82) The remaining tape indicator is not displayed. cSet [ REMAIN] to [ON] on the (TAPE SET) menu to always display the remaining tape indicator. (p. 54) A cassette label is not recorded. cUse a cassette with Cassette Memory. (p. 81) cErase unnecessary titles when the Cassette Memory is full. (p. 52) cSet the write-protect tab to REC. (p. 82) LCD screen/viewfinder Troubleshooting Symptom Cause and/or Corrective Actions An unknown language appears on the screen. cSee page 20. ,continued Troubleshooting Symptom Cause and/or Corrective Actions An unknown picture appears on the screen. • The camcorder is in [DEMO MODE]. ([DEMO MODE] is automatically displayed when you leave the camcorder for 10 minutes after selecting CAMERA without inserting a cassette.) cTouch on the LCD screen or insert a cassette to cancel [DEMO MODE]. You can also set [DEMO MODE] to [OFF] on the (SETUP MENU) menu. (p. 57) An unknown indicator appears on the screen. cRefer to the indicator list. (p. 97) The buttons do not appear on the touch panel. cTouch the LCD panel lightly. cPress DSPL/BATT INFO (or DISPLAY on the Remote Commander for DCR-HC18E/HC20E). (p. 37) The buttons on the touch panel do not work correctly or do not work at all. cAdjust the screen ([CALIBRATION]). (p. 87) The picture in the viewfinder is not clear. cExtend the viewfinder. (p. 16) cUse the viewfinder lens adjustment lever to adjust the lens. (p. 16) The picture in the viewfinder has disappeared. cClose the LCD panel. The picture is not displayed in the viewfinder when the LCD panel is open. (p. 16) The picture remains on the LCD screen. • This occurs when your camcorder is turned off forcibly by removing the battery pack, disconnecting the DC plug from your camcorder or the like while turning on the power. This is not a malfunction. Recording Symptom Cause and/or Corrective Actions The tape does not start when you press REC START/STOP. cSlide the POWER switch to select the CAMERA mode. (p. 15) cThe tape has reached the end. Rewind it, or insert a new cassette. cSet the write-protect tab to REC or insert a new cassette. (p. 82) cThe tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette. (p. 86) The power abruptly turns off. • [A.SHUT OFF] in the (OTHERS) menu is set to [5min]. (p. 59) cWhen approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off. Slide the POWER switch down to turn the power on again. (p. 15) Or use the AC Adaptor. cCharge the battery pack. (p. 12) The SteadyShot function does not function. cSet STEADYSHOT to [ON] in the (CAMERA SET) menu. (p. 48) Auto focus does not function. cSet [FOCUS] to [ AUTO]. (p. 30) cThe recording conditions are not suitable for auto focus. Adjust the focus manually. (p. 30) A vertical band appears when recording candlelight or electric light in the dark. • This occurs when the contrast between the subject and the background is too high. This is not a malfunction. Troubles...
Este manual também é adequado para os modelos :Câmaras de vídeo - DCR-HC16E (2.41 mb)
Câmaras de vídeo - DCR-HC18E (2.41 mb)