Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Câmaras de vídeo - Df (18.27 mb)
Câmaras de vídeo - Df (18.99 mb)
Facilidade de uso
After choosing the desired setting, press Jto exit. Option Description Image quality Choose image quality (055). Image size Choose image size (058). Choose a Picture Control (0100). Set Picture Control Adjust Active D-Lighting to preserve details in Active D-Lighting highlights and shadows (0110). Press 1or 3 to adjust monitor brightness for live view. Changes to monitor brightness Monitor brightness have no effect on photographs recorded with the camera. x 179 The Live View Display: Live View Photography w e rtq Item Description 0 q Time remaining The amount of time remaining before live view ends automatically. Displayed if shooting will end in 30 s or less. 184 w Autofocus mode The current autofocus mode. 175 e AF-area mode The current AF-area mode. 177 r Focus point The current focus point. The display varies with the option selected for AF-area mode (0177). 172 t Exposure indicator Indicates whether the photograph would be under- or overexposed at current settings (exposure mode M only). 43 x 180 D The Live View Display Although they will not appear in the final picture, jagged edges, color fringing, moire, and bright spots may appear in the monitor, while bright bands may appear in some areas with flashing signs and other intermittent light sources or if the subject is briefly illuminated by a strobe or other bright, momentary light source. In addition, distortion may occur if the camera is panned horizontally or an object moves at high speed through the frame. Flicker and banding visible in the monitor under fluorescent, mercury vapor, or sodium lamps can be reduced using Flicker reduction (0276), although they may still be visible in the final photograph at some shutter speeds. When shooting in live view mode, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera’s internal circuitry. A Exposure Depending on the scene, exposure may differ from that which would be obtained when live view is not used. Metering in live view is adjusted to suit the live view display, producing photographs with exposure close to what is seen in the monitor. x 181 The Information Display: Live View Photography To hide or display indicators in the monitor during live view photography, press the R button. Information on Information off 16-cell framing grid 9-cell framing grid 1 : 1 aspect ratio 16 : 9 aspect ratio Virtual horizon (0282) x 182 Manual Focus To focus in manual focus mode (068), rotate the lens focus ring until the subject is in focus. To magnify the view in the monitor up to about 15 . for precise focus, press the X(T) button. While the view through the lens is zoomed in, a navigation window will appear in a gray frame at the bottom right corner of the display. Use the multi selector to scroll to areas of the frame not visible in the monitor (available only if wide- or normal-area AF is selected for AF-area mode), or press W(M) to zoom out. X(T) button Navigation window x 183 D The Count Down Display A count down will be displayed 30 s before live view ends automatically (0 180; the timer turns red if live view is about to end to protect the internal circuits or, if an option other than No limit is selected for Custom Setting c4—Monitor off delay > Live view; 0253—5 s before the monitor is due to turn off automatically). Depending on shooting conditions, the timer may appear immediately when live view is selected. Note that although the count down does not appear during playback, live view will still end automatically when the timer expires. A HDMI If the camera is attached to an HDMI video device during live view photography, the camera monitor will remain on and the video device will display the view through the lens as shown at right. If the device supports HDMI-CEC, select Off for the HDMI > Device control option in the setup menu (0223) before shooting in live view. A See Also For information on using the J button to select the center focus point or toggle focus zoom, see Custom Setting f2 (OK button; 0261). For information on reducing flicker or measuring a value for spot white balance during live view, see pages 276 and 93. x 184 IMore on Playback I Full-Frame Playback To play photographs back, press the K button. The most recent photograph will be displayed in the monitor. Sub-command Multi selector dial O button K button G button L(U) button X(T) button W(M) button P button K button J button Main command dial 185 To Use Description View additional photographs View photo information View thumbnails Zoom in on photograph Delete images Change protect status Return to shooting mode Retouch photo W(M) X(T) O L(U) / K P Press 2 to view photographs in order recorded, 4 to view photographs in reverse order. Press 1or 3 to view information about current photograph (0188). See page 196 for more information. See page 199 for more information. Confirmation dialog will be displayed. Press O again to delete photo (0203). To protec...