Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Note that although any data currently being recorded will be lost, data that have already been recorded will not be affected by removing or disconnecting the power source. Viewfinder is out of focus: Adjust viewfinder focus (020). If this does not correct the problem, select single-servo autofocus ( AF-S; 074), single- point AF ( c; 078) , and the center focus point, and then frame a high- contrast subject in the center focus point and press the shutter-release button halfway to focus the camera. With the camera in focus, use the diopter adjustment control to bring the subject into clear focus in the viewfinder. If necessary, viewfinder focus can be further adjusted using optional corrective lenses ( 0 307). Displays turn off without warning: Choose longer delays for Auto off timers ( 0245). Information display does not appear in monitor: Shutter-release button is pressed halfway. If information display does not appear when you remove your finger from shutter-release button, confirm that On is selected for Auto info display ( 0238) and that battery is charged. Viewfinder display is unresponsive and dim: The response times and brightness of this display vary with temperature. Technical Notes 329 Shooting ( All Modes) Camera takes time to turn on: Delete files or folders. Shutter-release disabled: • Memory card is locked, full, or not inserted ( 015, 23, 338). • Release locked is selected for Slot empty release lock ( 0253) and no memory card is inserted ( 0 15). • Built- in flash is charging ( 031). • Camera is not in focus ( 027). • CPU lens with aperture ring attached but aperture not locked at highest f-number ( 0291). • Non- CPU lens is attached but camera is not in mode M ( 0 292). Only one shot taken each time shutter-release button is pressed in continuous shooting mode: Continuous shooting is not available if built-in flash fires ( 069, 89). Final photo is larger than area shown in viewfinder: Viewfinder horizontal and vertical frame coverage is approximately 95% . Photos are out of focus: • AF- S or AF- I lens is not attached: use AF- S or AF- I lens or focus manually. • Camera unable to focus using autofocus: use manual focus or focus lock ( 0 76, 81, 83). • Camera is in manual focus mode: focus manually ( 083). Focus does not lock when shutter-release button is pressed halfway: Use A( L) button to lock focus when live view is off and AF- C is selected for focus mode or when photographing moving subjects in AF-A mode ( 081). Can not select focus point: • e ( Auto- area AF; 0 78) is selected: choose another AF-area mode. • Press shutter-release button halfway to start standby timer ( 0 31). Can not select AF-area mode: Manual focus selected ( 0 74, 83). 330 Technical Notes AF-assist illuminator does not light: • AF-assist illuminator does not light if AF- C is selected for autofocus mode ( 074) or if continuou...