Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Keep the instructions in a safe place after reading so that you can refer to them later. Notice: this User’s Manual has been written for the following camera models: AgfaPhoto sensor 500-D, AgfaPhoto sensor 505-D and AgfaPhoto sensor 510-D. Precautions Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. • Do not point the camera directly into the sun or other intense light sources which could damage your eyesight. • Do not try to open the case of the camera or attempt to modify this camera in any way. High-voltage internal components create the risk of electric shock when exposed. Maintenance and repairs should be carried out only by authorized service providers. • Donotfiretheflashtooclosetotheeyesofanimalsorpeople,especiallyyoungchildren.Eyedamage may result. In particular, keep at least one meter away from infants when using the flash. • Keep the camera away from water and other liquids. Do not use the camera with wet hands. Never use the camera in the rain or snow. Moisture creates the danger of electric shock. • Keep the camera and its accessories out of the reach of children and animals to prevent accidents or damage to the camera. • If you notice smoke or a strange odor coming from the camera, turn the power off immediately. Take the camera to the nearest authorized service center for repair. Never attempt to repair the camera on your own. • Use only the recommended power accessories. Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. Disclaimer We assume no responsibility over and above the provisions of the Product Liability Law for damages suffered by the user or third parties as a result of inappropriate handling of the product or its accessories, or by their operational failure and by their use. We reserve the right to make changes to this product and its accessories without prior notice. Warning! Never open the camera or remove any parts of it. This will void all guarantee claims. Using your batteries For best performance and prolonged battery life, we recommend the use of AAA-sized rechargeable NiMH batteries. Extending battery life The following functions use up a great deal of battery power and should therefore only be used occasionally: • Excessive use of flash • Editing images on the camera display The battery life can be affected by soiling. Please clean the contacts with a clean, dry cloth before putting the batteries in the camera. Battery performance drops at temperatures below 5° C (4 ° F). If you use the camera at low temperatures you should have replacement batteries to hand and ensure they do not get too cold. Please note: you should not dispose of cold and seemingly flat batteries because these batteries may work again at room temperature. Parts of the Camera 1. Flash 2. Selftimer lamp . Microphone 4. Lens 5. Operation lamp 6. LCD display Five-way control button 7. OK/Enter button (vertically) 8. Right • 9. Down • 10. Up • 11. Left • 12. Playback button 1 . Menu button 14. Shutterbutton15. Modebutton14. Shutterbutton15. Modebutton 16. Power button 17. Strap mount 18. Battery cover 19. USB jack 20. Tripod socket Attaching the Strap Attach the strap to your camera as shown in the image. Caution Do not swing the camera around by the strap 4 Inserting the Batteries The camera is powered by two AAA-size alkaline batteries or rechargeable NiMH batteries. 1 1 Open the battery cover. Slide the battery cover in the direction indicated by the arrows. 2 2 Insert the batteries. Insert two AAA-size batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery compartment. 3 3 Close the battery cover. Turning Power On & Off 1 Press the Power button ( ) to turn on the camera in the Capture mode. The power turns on and the LED (2) lights red. 2 Press the Power button (1) again to turn the power off. The power turns off and the LED turns off. 5 Changing the Mode You can record images and voices in the REC mode and use the Playback mode to replay, delete or edit images on the LCD monitor. Switching between REC and Playback Mode In REC mode, press the Playback button ( ) to switch to the Playback mode. In Playback mode, press the Playback button ( ) to switch to the REC mode. Selecting the REC Mode 1 1 Press the Power button to enter the Capture mode. If the camera is in Playback mode, press the Playback button to change to REC mode. 2 2 Press the Mo...
Este manual também é adequado para os modelos :Câmaras de vídeo - 505-D (3.16 mb)
Câmaras de vídeo - 510-D (3.16 mb)