Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Acer, Modelo DIM-462

Fabricante : Acer
Arquivo Tamanho: 3.64 mb
Arquivo Nome : 58920246-ef36-48b5-a3a5-06f23af01bcb.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Turning the Camcorder Recording Displays ON/OFF Recording You can change the display by pressing the DISPLAY/DATA CODE button. Each time you press the DISPLAY/DATA CODE button, the display will change as follows: Normal display Recording mode, operating mode, time code, warnings, date and time* Date and time* No display DISPLAY/ DATA CODE * Appears when GUIDE INFO is set to D/T DISPLAY in the DISP. SET UP submenu (CAMERA menu). Notes: • The display becomes reset when you turn the power off by the POWER switch or standby lever. • The same information will be displayed on a connected TV screen (TV SCREEN function). • The audio level indicator can be displayed or hidden through the menu independently from the DISPLAY/DATA CODE button. 38 Confirmation/Warning beeps The camcorder’s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camcorder operations such as when you turn the camcorder on, during the self-timer countdown, right before the camcorder’s automatic shut-off, and also upon any unusual condition of the camcorder. Beeps are not recorded on the tape. TAPE + CAMERA TAPE + PLAY (VCR) CARD + CAMERA CARD + , , , PLAY (VCR) E BEEP••• ONSYSTEM ( 20) To turn the beep off, open the menu and select SYSTEM. Then select BEEP, set it to OFF and close the menu. Demonstration Mode You can see a demonstration of the camcorder’s main features. To see the demonstration, do either of the following: • With no cassette or memory card inserted, turn the DEMO MODE on in the CAM.MENU or C.CAM.MENU and close the menu. • Leave the camcorder with no cassette or memory card inserted for five minutes after turning it on. TAPE + CAMERA , CARD + CAMERA Recording DEMO MODE••• ONDISP. SET UP ( 20) To turn the demonstration mode off, open the menu and select DISP. SET UP. Then select DEMO MODE, set it to OFF and close the menu. Notes: • The opening animation will not appear when the demonstration mode is turned off. • To cancel the demo mode once it has begun: push any button, turn off the power, load a cassette or insert a memory card. 39 Tips for Making Better Videos E Holding the Camcorder For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary support the camcorder with your left hand. With practice, you will be able to operate the controls by touch, without taking your eye off the action. Using a Tripod To prevent any unwanted movement, you can mount the camcorder on a tripod, (or any flat surface at a suitable height) and operate it with the wireless controller. • When you are using a tripod, be careful not to leave the viewfinder exposed to bright sunlight as it may melt. (The light is concentrated by the viewfinder lens.) Change the angle of the viewfinder so that the sun does not shine into it. • Make sure that the fastening screw of the tripod is no longer than 1/4 inch (5.5 mm), as it will damage the camcorder. Recording Sound Recording For greater creative control over audio recording, you can connect an external microphone to the camcorder via the MIC terminal. When using the MIC terminal, use a microphone with a built-in power supply (condenser microphone). It is possible to connect almost any stereo microphone with a plug diameter of 1/8 inch (3.5 mm), however, their audio levels will be different from that of the built-in microphone. 40 Composition The most important element in the scene does not necessarily have to be centered. For a more interesting picture, try to position your subject slightly to one side. Leave some space on the side of the frame that the subject is facing or moving towards. Do not cut off the top of the subject’s head, and do not cut people off at the neck, hips or knees (move a little bit above or below). E Watch out for distracting objects in the background. Picture Angle Instead of zooming while recording, try to choose your picture angle before you begin. A good way to tell a story with video is to begin Long shot with a long shot that establishes the situation, and then move in with medium shots and close-ups to show the details. Remember to change your viewpoint for each shot. Medium shot Remember that any camcorder movement or change in picture angle should have a definite purpose. Avoid unnecessary or half-hearted movements. Close-up Recording Camcorder Moves Use pans to record a landscape or follow a moving subject. Decide the area you wish to cover and stand facing the end of your panning angle. Without moving your feet, turn your waist to the starting position. Start recording, and after a Pan few seconds begin to turn slowly from the waist. Hold the final image for a few seconds before you stop recording. Tilt the camcorder up to exaggerate the height of the subject. Tilt down from the top of a building, for example, as an introduction to subjects at the bottom. Tilt 41 Zooming E T W ZOOM W T TW Zoom out Zoom in This camcorder is equipped with 20. optical zoom and 1...

Este manual também é adequado para os modelos :
Câmaras de vídeo - GL2 (3.64 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias