Special tools and equipment, as well as specialized handling and care of product during installation, may be required. Before beginning this installation, carefully read through the following instructions. Materials/ Tools required for this installation: 1. #2 Phillips screwdriver 2. Powered screwdriver or drill with adapter 3. 3/8" drill bit 4. Razor knife or similar 5. Awl or similar tool 6. Audiovox VCP (AVP- 7180 or equiv.) MATERIALS PROVIDED FOR INSTALLATION: INSTALLATION INSTRUCTION

Route video and audio cables to passenger’s side rear of vehicle. Using a razor knife, carefully cut a slit in carpet to allow cables to pass through. Make sure wiring will not rub against edge of bracket. Position VCP mounting bracket (item 3 pg 2) against side panel and 1 1/8" from back edge of ledge on side panel as shown. Make sure bottom of bracket is firmly resting on floor of vehicle. Mark the center of slot on side panel. See Figure 1. FIGURE 1 2. Carefully drill a 3/8" hole in locat

Mark position of bracket and remove housing and VCP. Install (3) three #8 x 1 1/2" (item 2 pg 2) in holes in bracket and tighten (1) one screw previously installed. NOTE: Do not overtighten screws. See Figure 6. FIGURE 4 5. Align screws in VCP with slots in bracket and slide into position. Make sure wiring does not rub against edge of bracket. See Figure 5. FIGURE 6 4 FIGURE 7 8. Install housing bottom (item 5 pg 2) and secure to bracket by inserting clips into slots and pressing firmly.

To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes. Do not leave tapes on the floor of the vehicle. Store tapes not being used in their cases. Do not leave video tapes inside a hot vehicle. 6 FEATURES CONGRATULATIONS on your purchase of the This unit is designed to satisfy all your VHS tape playback needs and with proper The features of the Model AVP-7200A Video Cassette Player include: • DIGITAL AUTO TRACKING This VCP plays clear pictures without specia

• Shorted coax cable between VCP and TV. • Check cable/by pass or continuity test. Poor video/snowy picture or lines on screen. • Dirty heads. • Clean head using tape cartridge cleaner. We recommend using cartridge with cloth or paper tape and cleaning drops included. These are readily available at retail stores. 24 SPECIFICATIONS MODEL AVP-7280A POWER SUPPLY 12Vdc POWER CONSUMPTION 13Watts DIMENSION 265 X 91 X 295 (W X H X D) mm WEIGHT APPROX. 3.4 kg (7.5 lbs) VIDEO SIGNAL SYSTEM NTSC Color VID

It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire, casualty and electrical hazards. Audiovox Electronics Corporation 150 Marcus Blvd., Hauppauge, NY 11788 (128-6418) CAUTIONS AND WARNINGS To obtain the best results and to avoid malfunctions, PROCEDURES CONTAINED IN THIS OWNER’S RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIE

Press this key once more, the tape will advance at a high speed. Ul 0 • Press the REW key once in the playback mode. And then the tape is rewound rapidly with the pictures. Press this key once more the tape will rewind at a high speed. ► PUT 6 • Press the PLAY key during playback and then the VCP enters the ReAuto Tracking mode. 12 IDENTIFICATION FRONT PANEL When power is supplied to the set, the power indicator The Power ON and Power OFF mode will be toggled by When the POWER is switched

BASIC OPERA TION (CONTINUED ) ERASURE PROTECTION Video cassettes are equipped with a safety tab to When the tab is removed, recording can not be performed. • TO PREVENT ACCIDENTAL ERASURE • After recording, break off the safety tab with a • TO RECORD AGAIN • Cover the hole with cellophane tape. screwdriver to avoid accidental re-recording. 15 BASIC OPERATION (CONTINUED) 16 BASIC PLAYBACK I y. o « ¬ BASIC OPERATION (CONTINUED) 17 ILOADING The power is turned on automatically when the cassette is

9. Ventilation-Slots and openings in the cabinet are provided for ventilation to ensure Player and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the Video Cassette Player on a bed, sofa, rug, or other similar surface. The Video Cassette Player should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a book case or rack unless proper v