OPEN “MAIN MENU” Press MENU. SELECT “VCR SETTINGS” Press 5. SELECT “CLOCK SETTINGS” Press 6. ADJUST CLOCK SETTINGS Use the arrow keys to select and set each of the following: Daylight Savings Please refer to page 39. Auto Clock Set On – Auto Clock Set will search for a local channel and detect the time automatically. Off – Auto Clock Set will be disabled. You must set the clock manually. Time Zone Auto – Automatically detects your local time zone. Eastern – Selects Eastern Standard Time. Central

To set the clock at any other time follow each of these steps: 1 Press MENU until the DUAL-DECK FEATURES menu appears. 2 Press “1” to select VCR SETTINGS/SET CLOCK. 3 Press “1” to select DISPLAY SETTINGS/CLOCK. 4 Press “1” to select SET CLOCK. 5 Press the number buttons to enter information as you are prompted by the blinking cursor. If you don’t need to change the information for a particular item, press to move to the next item. Set Month (1-12) January is “01”, October is “10”, etc. Set Year

...on your purchase of this Go-Video Dual-Deck VCR! We know you will enjoy this product for many years to come. In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the VCR): __________________________________ . About this Manual This manual has been designed to acquaint you with all the features and functionality of the Dual-Deck VCR. The first two chapters cover basic setup and a quick t

Press MENU to continue. 3 RUN AUTO SETUP As soon as you press MENU, the Dual-Deck VCR will automatically perform the following steps: Auto Channel Search – Automatically detects the source of incoming channels (antenna or cable) and then searches for all active channels in your area. Auto Clock Set – Automatically sets the VCR’s internal clock, which is necessary for accurate timer recording. • This procedure may take a few minutes to complete. When finished, the VCR will display the lowest chan

• While the VCR is searching for the next preview and you see the start of a preview you want to watch, press SEARCH/ INDEX and MOVIE ADVANCE will reverse back to the start of that preview. 1 INSERT TAPE Insert a purchased/rented video in Deck 1. • MOVIE ADVANCE works in Deck 1 only. •Tapes must be recorded in SP with the record safety tab removed. 2 OPEN “SEARCH MENU” Press SEARCH/INDEX. 3 “IS THIS A PURCHASED/RENTED MOVIE?” The VCR will recognize that the tape is missing the record safety tab,

The Tuner Band setting allows you to specify which source you are using. Use this setting only if Auto Setup detected the incorrect band, i.e. channels are coming in on the wrong channel numbers. Open “Setup Menu” 1 Press and hold the Menu button for 3 seconds. Select “Tuner & Channel List” 2 Press 3. SETUP MENU 1 Set Clock Menu 2 : Copy/Record Settings 3 : Tuner And Channel List 4 : Dual-Deck Features 5 : Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit O OO

Just follow these simple steps: 1 Insert your source tape into Deck 1 on the left side of the Dual-Deck VCR. 2 Insert your target tape into Deck 2 on the right side of your VCR. 3 Press COPY TAPE on the front panel of your Dual-Deck VCR or on your remote control. Your Dual-Deck VCR will begin copying from Deck 1 to Deck 2. Note: When you press Copy Tape, Deck 1 rewinds a few seconds (called “pre-roll”) and Deck 2 goes into Record Pause mode automatically before copying begins. This “synchro-star

Record the serial number from the back of your VCR-2 here. Attach your sales receipt for reference. Model Number: GV2020 Serial Number: Purchase Date: It is important that you register your VCR-2 with Go-Video, Inc. so that you can be contacted in the event of a product modification or recall. To register your VCR-2, complete the warranty registration card and mail it in. To contact Go-Video, Inc. call (800) 279-1600 for information regarding your VCR-2. WARNING: ^ To reduce the risk of fire or

EDITING: The Go-Video Dual-Deck Director editing process is very simple, and easy to learn and use. You just point and click on VCR style controls right on your computer screen. • First, go through your raw 8mm camcorder footage marking segments you want to use. Just click the beginning and end points. That’s it. You’ve defined your video clips. Dual-Deck Director remembers where these segments are. • When you’ve found all the segments you want to keep, simply reorder them, click the MAKE TAPE b