Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Settings are made automatically. When setup is done, this screen appears. For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. WARNING: Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only. Please make all cable or antenna connections before powering on. CH AUTO SET PROCEEDING PROCEEDING AUTO CLOCK SET CANCEL : PRESS STOP KEY 3 Connecting 2 Press Combo on the remote for Combo mode. *Important: If a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Reset all unit Memory FunctionsManual Clock Set If AUTO CLOCK SET was incomplete, manually set the clock as follows. Press ACTION on the Remote to display SET CLOCK Menu screen. SET : SELECT : END : ACT I ON SET CLOCK DST : ON SESELE CT MONTHTH 1 / / : 2 2 Press to select the month and press to set. In the same manner, select and set the date, year, time, and DST. (Daylight Saving Time) SET : START : ACT I ON SET CLOCK DST : ON SESET COMPLETEDCOMPLETED 2 / 6/2 / 6/ :20022002 WEDWED 1212 0000PMPM 3 3 Press ACTION twice to start CLOCK and exit. POWER SELECT/SET :CH UP :CH DOWN ACTION :VOL UP :VOL DOWN When moving unit to a new location, or if a mistake was made in the Initial Setup section. • Make sure a tape is not inserted in the unit. Initial VIDEO INAUDIO INPOWERVOLCH STOP/EJECTREW/PLAY/REPEATFF/RECTIMER/FM ACTIONREC ON TIMER VIDEO IN AUDIO IN POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM ACTION RE C ON TIMER PROG TIMERPROG TIMER 1 2 Turn the unit Power on. Press and hold both PLAY and FF on the unit for more than 5 seconds. • The power will shut off. • Please ignore “NO CASSETTE” warning. 3 Do “Initial Setup” on page 8. Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Model PV-C2062 remote shown. Reset Language, Channels, Clock, Press ACTION* to display MAIN MENU. MAIN MENU TV VCR EX I TCLOCKCH LANGUAGE SET :ACT I ON SELECT : 1 Language 1) Press to select language icon. MAIN MENU TVVCR LANGUAGE SET :ACT I ON SELECT : TV EX I TCLOCKCH 2) Press ACTION repeatedly. TVVCR IDIOMATV MENU PR INC I PAL CANAL RELOJ SAL I R HOLA F I JAR : ACT I ON ELEG I R : For Spanish BONJOUR LANGUE MENU TELE MAGNET . SORT I EHORLOGECANAL REGLER : ACT I ON SEL. : For French For English MAIN MENU TVVCR HELLO LANGUAGE SET :ACT I ON SELECT : TV EX I TCLOCKCH 3) Press to select “EXIT.” Press ACTION to exit. Channels 1) Press to select “CH.” MAIN MENU CLOCKCH SET :ACT I ON SELECT : VCRTV EX I T LANGUAGE 2) Press ACTION. ANTANTENNENNA :: CABLEABLE AUTO SET CHANNEL CAPT I ON WEAK S I GNAL D I SPLAY : OFF SELECT : SET : SET END :ACT I ON SET UP CHANNEL 3) Press to select “ANTENNA,” then press to set your antenna system (“TV” or “CABLE”). 4) Press to select “AUTO SET,” then press . • After Channel Auto Set is finished, Clock Auto Set will be performed. (If clock is set manually, Clock Auto Set will not be performed.) Clock 1) Press to select “CLOCK.” MAIN MENU VCR CLOCKCHSET :ACT I ON SELECT : TV EX I TCH LANGUAGE 2) Press ACTION. AUTO CLOCK SET MANUNUALAL T I ME ZONE ADJUST : 0 SELECT : SET : END :ACT I ON SET CLOCK (“TIME ZONE ADJUST” appears only when auto clock is set.) 3) Press to select “MANUAL” or “AUTO CLOCK SET” and press . • For Auto Clock Set, select “AUTO CLOCK SET,” then press “SET”. SET : START : ACT I ON SET CLOCK DST : ON 2 / 6/2 / 6/ :20022002 WEDWED 1212 0000PMPM SESELE CT HOURHOUR SELECT : 4) Press and press to select and set the month, date, year, time, and DST (Daylight Saving Time). 5) Press ACTION twice to start the clock and exit this mode. 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Time Zone Adjust *Important: If a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Time Zone Adjust (Only when Auto Clock is set.) 1) Press to select “CLOCK.” MAIN MENU VCR CLOCKCHSET :ACT I ON SELECT : TV EX I TCH LANGUAGE 2) Press ACTION. POWER ACTION SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN NUMBER Keys ADD/DLT Model PV-C2062 remote shown. Basic Operation AUTO CLOCK SET MANUAL T I MEE ZOZONE ADJUSJUSTT : 0 SELECT : SET : END :ACT I ON SET CLOCK 3) Press to select TIME ZONE ADJUST and press or to subtract or add hour(s) as necessary. AUTO CLOCK SET MANUAL T I MEE ZOZONE ADJUSJUSTT : +1+1 SELECT : SET : END :ACT I ON SET CLOCK 4)Press ACTION twice to exit. 11 Add or Delete a Channel CHANNEL 08 ADDED To add channel: Select channel with number keys and press ADD/DLT. CHANNEL 08 DELE TED To delete channel: Select channel with ...
Este manual também é adequado para os modelos :TV - PV C2542 (1.44 mb)
TV - PV C2062 (1.44 mb)