Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
SP APC CLOCK 26 Basic Operations 01GB04BAS-ED313.p65 26 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) 3 EASY TIMER Push the EASY TIMER knob to finish setting the clock. The VCR enters the timer recording setting mode. To continue the Easy Timer setting, go to step 2 in “Setting the Easy Timer” on page 24. To quit the Easy Timer setting mode without changing any settings, push the EASY TIMER knob repeatedly until the t indicator appears in the display window. SP APC START To set the timer and clock setting using the remote commander You can also use the remote commander to set the Easy Timer and Easy Clock. The operations on the VCR and the remote commander correspond as follows: To Do this on the VCR Do this on the remote commander Confirm the setting and go to the next setting Push the EASY TIMER knob Press EASY TIMER Change the time by 15 minutes (in START/STOP mode) Turn the EASY TIMER knob or hold PROGRAM +/– down Hold PROG +/– down Change the time by one minute (in START/STOP mode) Press PROGRAM +/– Press PROG +/– Select the programme Turn the EASY TIMER knob or press PROGRAM +/– Press PROG +/– or INPUT SELECT Change the hour/minute by one hour/minute (in CLOCK mode) Turn the EASY TIMER knob or press PROGRAM +/– Press PROG +/– Basic Operations You can also use the programme number buttons to set the clock, start and stop times, and the programme you want to record. Just press the programme number buttons to enter the hours and minutes. For example: • To set the clock to “8:20”, press 0, 8, EASY TIMER , 2, 0 and EASY TIMER in sequence. • To set the start or stop time to “8:20”, press 0, 8, 2, 0 and EASY TIMER in sequence. If you make a mistake, re-enter the correct digits before pressing EASY TIMER . continued Basic Operations 27 01GB04BAS-ED313.p65 27 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Recording TV programmes using the Easy Timer function (continued) To stop recording To stop the VCR while recording, press x STOP. To check or change the timer setting Push the EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then re-enter the new setting, if necessary. If you do not want to change any of the settings, push the EASY TIMER knob repeatedly until the t indicator appears in the display window. You can also change the timer setting using the TIMER SET/CHECK menu. For details, see page 40. To cancel the timer setting To cancel the Easy Timer setting while entering a setting, press CLEAR on the remote commander or press PROGRAM + and – on the VCR at the same time. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The t indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen. • Check the timer settings. • Watch another TV programme. To watch the recorded programme right after recording with the Easy Timer The SEARCH MODE indicator starts flashing when the VCR finishes the Easy Timer recording. To watch the recorded programme, push the EASY TIMER knob. The VCR turns on, starts searching, then automatically starts playback from the beginning of the recording. For details, see page 32. 28 Basic Operations 01GB04BAS-ED313.p65 28 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Tips • To record from a source connected to the LINE-1 IN jacks, press INPUT SELECT or PROG +/– or turn the EASY TIMER knob to display “L” in the display window. • To record NTSC signals, set the tape speed to SP or EP. To record in the EP mode, set the tape speed to “LP” in the display window. Notes • You cannot set the Easy Timer if eight programmes have already been set. • You can set the timer for only one programme using the Easy Timer function. If you want to set the timer for other programmes, use the TIMER SET/CHECK menu. For details, see page 30. • You cannot set the date using the Easy Timer function. Set the date using the CLOCK SET menu if you want to set the timer with the menu. For details, see page 16. • The t indicator flashes in the display window when you complete the setting with no tape inserted. Basic Operations Basic Operations 29 01GB04BAS-ED313.p65 29 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Setting the timer manually You can preset up to eight programmes at a time. Before you start… • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. 1 2 3 4 5 6 7 8 9 0 ?/1 INPUT SELECT PROG +/– MENU OK M/m/ Este manual também é adequado para os modelos :
VCR jogadores / vídeo - SLV-ED215PS (805 kb)
VCR jogadores / vídeo - SLV-ED313ME (805 kb)