Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
RECALL 1 2 3 4 4 Press SMART SEARCH. The SMART SEARCH screen disappears. Note • You cannot use or return the deleted information. About the Demonstration Mode The Smart Search Plus function has a Demonstration Mode that allows the user, such as a salesperson, to automatically display the Smart Search Plus screens. To activate the Demonstration Mode While the VCR is turned on, press and hold the both x (stop) and A (eject) buttons on the VCR for a few seconds. The demonstration will start and the four kinds of Smart Search Plus screens will be displayed repeatedly. If you operate the VCR, the Demonstration Mode temporarily stops. After about five minutes, the demonstration will restart. To cancel the Demonstration Mode While the VCR is turned off, press and hold the both x (stop) and A (eject) buttons on the VCR for a few seconds. You can also cancel the Demonstration Mode if you turn the power off and unplug the mains lead. Additional Operations Storing, searching and deleting programme information (Smart Search Plus) Searching using the index function The VCR automatically marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. 1 Insert an indexed tape into the VCR. 2 Press ./> INDEX SEARCH. • To search ahead, press > INDEX SEARCH. • To search backwards, press . INDEX SEARCH. The VCR starts searching, and playback starts automatically from that point. SEARCH INDEX To stop searching Press x STOP. Notes • No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the programme position during recording pause. • When you press . INDEX SEARCH, if there is nothing recorded before the selected index signal, playback may not start exactly at the index signal. Searching using the index function Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then turns off), distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking. During playback, press PROGRAM +/– on the VCR to display the tracking meter. The TRACKING Tracking meter distortion should disappear as you press one of the two buttons (the indicator lights up). To resume automatic tracking adjustments, eject the tape and re-insert it. About the Reality Regenerator (RR) function The Reality Regenerator function automatically restores the picture to its original quality during playback. To use the Reality Regenerator function 1 Press MENU, then select OPTIONS and press OK. 2 Press M/m to highlight OPTIONS-2, then press OK. 3 Press M/m to highlight RR, then press OK. CONFIRM : SELECT : OK MENUEXIT : OPTIONS - 2 TIMER OPTIONS DECODER / LINE3 VARIABLE POWER SAVE TV DIRECT REC OFF DECODER HIGH OFF RR NORMAL RETURN Additional Operations 4 Press M/m to set RR to NORMAL or HIGH, then press OK. The RR indicator lights up in the display window. 5 Press MENU to return to the original screen. To turn it off, select OFF in step 4. The RR indicator turns off in the display window. continued Adjusting the picture OK About the Optimum Picture Control (OPC) function The Optimum Picture Control (OPC) function automatically improves recording and playback quality by adjusting the VCR to the condition of the video heads and tape. To maintain better picture quality, we recommend that you set OPC to ON in the OPTIONS-1 menu (the OPC indicator lights SELECT : ON OFF OFF OPC OFF NICAMHIFI AUDIO E1 8 0 EDIT AUDIO MIX AUTO LONG PLAY TAPE LENGTH RETURN AUTOCOLOUR SYSTEM SET : EXIT : MENU up in the display window). For details, see page 80. OPC playback The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC. OPC recording Whenever you insert a tape and start recording for the first time, the VCR adjusts to the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment is retained until the tape is ejected. To deactivate the OPC function Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display window turns off. Tip • To set tracking to the centre position, press the PROGRAM + and – buttons on the VCR at the same time. Notes • You can adjust the tracking for an NTSC-recorded tape but the tracking meter will not be displayed. • With the Auto Long Play function on, the OPC function will work only in SP mode. If the tape speed automatically switches from SP to LP, the OPC function turns off. If, however, the entire programme is recorded in LP mode, the OPC function will work. • There is a delay of about ten seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator flashes slowly) and press z REC to have the VCR analyse the tape (the OPC indicator flashes rapidly) and return to recording paus...