Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
• If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery with an old one. • Do not mix different types of batteries. 5 Getting Started Getting Started SLV-KF295SV/XF245SV 3-858-368-11 (1) Step 3 Step 3 Connecting the unit to mains Aerial cable AC IN AERIAL IN AERIAL OUT : Signal flow Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the unit. AERIAL OUT IN AERIAL OUT Connect AERIAL OUT of the unit and the aerial input of your TV using the supplied aerial cable. IN Connect AC IN of the unit to the mains using the supplied mains lead. Getting Started SLV-KF295SV/XF245SV 3-858-368-11 (1) Additional connections To a TV that has phono type audio/video input jacks This additional connection improves picture and sound quality. Connect the TV as shown on the right. To a stereo system You can improve sound quality by connecting a stereo system as shown on the right. AUDIO VIDEO LINE IN LINE OUT This unit TV Audio/video cable (supplied) This unit Stereo system AUDIO VIDEO LINE IN LINE OUT Audio cable (not supplied) IN VIDEO AUDIO Getting Started AUX IN 7 Getting Started SLV-KF295SV/XF245SV 3-858-368-11 (1) Step 4 Step 4 Tuning your TV to the unit If you have connected your unit to the TV using the audio/video cable, skip this step. u(On/Standby) Press u(On/Standby) to turn on the unit. Turn on your TV and select a programme position for video playback. Choose a channel between UHF 30 and 39 on the TV where there is no picture and no sound or only a steady rustling sound. This channel will now be referred to as the video channel. Insert a tape recorded in the colour system matching your TV into the cassette compartment. The unit starts playing automatically if you insert a tape with its safety tab removed. 4 Press a PLAY on the unit. 5 Tune the TV until the video playback picture is clearly displayed on the TV screen. Refer to your TV manual for tuning instructions. You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel. If the playback picture does not appear clearly, see “To obtain a clear playback picture” on page 9. Getting Started SLV-KF295SV/XF245SV 3-858-368-11 (1) To obtain a clear playback picture If the playback picture does not appear clearly in step 5 above, turn the RF CHANNEL screw on the rear panel of the unit with a screwdriver to a position where the TV clearly displays the playback picture. Selecting the TV system For your TV to receive the correct signal from your unit, you must set the TV SYSTEM switch on the rear panel of the unit to either G (for system B/G) or K (for system D/K). If this switch is set to the wrong position, the sound will be distorted. RF CHANNEL Getting Started TV SYSTEM K G 9 Getting Started SLV-KF295SV/XF245SV 3-858-368-11 (1) Basic Operations Playing a tape PICTURE NTSC PB COLOR SYSTEM 6EJECT P PAUSE 3/# SEARCH )FF a PLAY pSTOP 0REW 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The unit turns on, and starts playing automatically if you insert a tape with its safety tab removed. Basic Operations SLV-KF295SV/XF245SV 3-858-368-11 (1) 3 PLAY PLAY Press aPLAY. When the tape reaches the end, it will rewind automatically. Additional tasks To Press Stop play p STOP Pause play P PAUSE Resume play after pause P PAUSE or a PLAY Search forward )FF or #SEARCH during playback Search backward 0REW or 3SEARCH during playback Fast-forward the tape )FF during stop Rewind the tape 0REW during stop Eject the tape 6EJECT To set the colour system If streaks appear during playback, set COLOR SYSTEM on the unit to conform to the system that the tape was recorded in. (Normally set the switch to AUTO.) Basic Operations If your tape was recorded in Set COLOR SYSTEM to PAL PAL/MESECAM NTSC NTSC MESECAM PAL/MESECAM continued Basic Operations SLV-KF295SV/XF245SV 3-858-368-11 (1) Playing a tape (continued) To play an NTSC-recorded tape Set NTSC PB on the unit according to the colour system of your TV. If your TV is Set NTSC PB to PAL ON PAL TV NTSC 4.43 NTSC 4.43 NTSC 3.58 NTSC 3.58 Watching a rental tape Set PICTURE on the unit to RENTAL PICTURE. Noise will be reduced on the playback picture. After watching the rental tape, set the switch back to NORMAL. Selecting the sound during playback Press AUDIO MONITOR to select the desired sound. Each press of the button changes the display on the unit. When you play a tape recorded in stereo or with a bilingual sound track, the HiFi indicator on the unit lights up. AUDIO MONITOR To listen to a Press AUDIO MONITOR until the Stereo tape’s Bilingual tape’s display window indicator shows Stereo sound Main and sub sounds “L/R” Left channel Main sound “L” Right channel Sub sound “R” Standard sound* Standard sound* No indication * The mixed sound of left and right channels (monaural) Basic Operations SLV-KF295SV/XF245SV 3-858-368-11 (1)...
Este manual também é adequado para os modelos :VCR jogadores / vídeo - SLV-XF245SV (586.04 kb)