Assessments - 3, GPA: 3.7 ( )

Fabricante : Sony Arquivo Tamanho: 293 kb Arquivo Nome : Língua de Ensino:

The white bar indicates the approximate length of tape remaining. To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. 2 Select another programme position on the TV. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape. Safety tab 8 01GB02CNT-ED818.p65 8 12/3/01, 11:10 AM SLV-ED818 GB 3-065-581-E1 (1) Recording TV programmes using the Easy Timer function The Easy Timer function allows you to make a timer recording of a programme without turning on your TV. Set the recording timer to record only one programme that will be broadcast within the next 24 hours using the EASY TIMER knob. If the VCR clock has not been set, you can also set the clock before setting the timer recording. Setting the Easy Timer PROGRAM +/– Before you start… • Insert a tape with its safety tab in place. Make sure the tape is longer than the recording time. REC SPEED EASY TIMER SP/LP knob (SP/EP) 1 EASY TIMER Push the EASY TIMER knob. The START indicator appears in the display window. If the clock has not been set, “–:– –” appears. Go to step 2 in “Setting or changing the Easy Clock” on page 11. SP APC START 2 EASY TIMER Set the recording start time by turning the EASY TIMER knob clockwise or counterclockwise to increase or decrease the time by 15 minutes. To increase or decrease the time by one minute, press PROGRAM +/–. SP APC START EASY TIMER 3 Push the EASY TIMER knob to confirm the start time setting. The STOP indicator appears. SP STOP APC continued 9 01GB02CNT-ED818.p65 9 12/3/01, 11:10 AM SLV-ED818 GB 3-065-581-E1 (1) Recording TV programmes using the Easy Timer function (continued) 4 EASY TIMER Set the recording stop time in the same way as in step 2, then push the EASY TIMER knob. A programme number flashes. SP APC 5 EASY TIMER Turn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to record. To select the tape speed, press REC SPEED. REC SPEED SP/LP LP APC (SP/EP) EASY TIMER 6 Push the EASY TIMER knob to confirm the setting. The t indicator appears in the display window and the VCR stands by for recording. 10 01GB02CNT-ED818.p65 10 12/3/01, 11:10 AM SLV-ED818 GB 3-065-581-E1 (1) 1 2 3 4 5 6 7 8 9 0 Setting or changing the Easy Clock When “–:– –” is displayed in the display window, the VCR clock has not been set. You need to set the clock using the Easy Clock function before setting the timer. You can also change the current time using the Easy Clock function. EASY TIMER knob PROG +/– Programme number buttons EASY TIMER 1 EASY TIMER • When “–:– –” is displayed in the display window, push EASY TIMER. • To change the clock setting, push and hold the EASY TIMER knob on the VCR for more than three seconds. The CLOCK indicator and the current clock setting appear in the display window. SP APC CLOCK 2 EASY TIMER Set the current time using the EASY TIMER knob. 1 Turn the EASY TIMER knob clockwise or counterclockwise to enter the current hour. 2 Push the EASY TIMER knob to confirm the hour setting. 3 Turn the EASY TIMER knob to increase or decrease the minutes setting by a minute at a time. SP APC CLOCK continued 11 01GB02CNT-ED818.p65 11 12/3/01, 11:10 AM SLV-ED818 GB 3-065-581-E1 (1) Recording TV programmes using the Easy Timer function (continued) 3 EASY TIMER Push the EASY TIMER knob to finish setting the clock. The VCR enters the timer recording setting mode. To continue the Easy Timer setting, go to step 2 in “Setting the Easy Timer” on page 9. To quit the Easy Timer setting mode without changing any settings, push the EASY TIMER knob repeatedly until the t indicator appears in the display window. SP APC START To set the timer and clock setting using the remote commander You can also use the remote commander to set the Easy Timer and Easy Clock. The operations on the VCR and the remote commander correspond as follows: To Do this on the VCR Do this on the remote commander Confirm the setting and go to the next setting Push the EASY TIMER knob Press EASY TIMER Change the time by 15 minutes (in START/STOP mode) Turn the EASY TIMER knob or hold PROGRAM +/– down Hold PROG +/– down Change the time by one minute (in START/STOP mode) Press PROGRAM +/– Press PROG +/– Select the programme Turn the EASY TIMER knob or press PROGRAM +/– Press PROG +/– or INPUT SELECT Change the hour/minute by one hour/minute (in CLOCK mode) Turn the EASY TIMER knob or press PROGRAM +/– Press PROG +/– You can also use the programme number buttons to set the clock, start and stop times, and the programme you want to record. Just press the programme number buttons to enter the hours and minutes. For example: • To set the clock to “8:20”, press 0, 8, EASY TIMER , 2, 0 and EASY TIMER in sequence. • To set the start or stop time to “8:20”, press 0, 8, 2, 0 and EASY TIMER...

Baixe o seu

Para fazer o download, introduza 2 dígitos :