Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Refer to “Index to parts and controls” for button locations. ?/1 ON/STANDBY EASY TIMER x STOP 1 EASY TIMER Press EASY TIMER. “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. n 2 EASY TIMER Turn EASY TIMER to set the recording date. continued Recording TV programmes using the Easy Timer (continued) 3 EASY TIMER Press EASY TIMER. START indicator and the current time appear in the display window. 4 EASY TIMER Turn EASY TIMER to set the recording start time. You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM 5 EASY TIMER Press EASY TIMER. STOP indicator and the recording stop time appear in the display window. 6 EASY TIMER Turn EASY TIMER to set the recording stop time. You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM EASY TIMER Press EASY TIMER. The programme position or LINE input appears in the display window. EASY TIMER Turn EASY TIMER to set the programme position. INPUT SELECT To record from other equipment connected to one or more of the LINE inputs, turn EASY TIMER or press INPUT SELECT to display the connected line in the display window. EASY TIMER Press EASY TIMER. The current tape speed mode appears in the display window. 10 EASY TIMER Turn EASY TIMER to set the tape speed, SP, LP or AUTO. continued Recording TV programmes using the Easy Timer (continued) 11 EASY TIMER Press EASY TIMER to complete the setting. “OK” appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. To record from other equipment, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR at the same time during any of the Easy Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1 . The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen (page 18). • Check the timer settings. • Watch another TV programme (page 18). To use the Auto Tape Speed function In step 10 above, turn EASY TIMER to select AUTO. When you are recording a programme in the SP mode and the remaining tape length becomes shorter than the recording time, the recording tape speed is automatically changed to the LP mode (or EP mode when you are recording NTSC signals). Note that some noise will appear on the picture when the tape speed is changed. To operate this function correctly, the “TAPE SELECT” setting in the USER SET menu must be accurate. To set the clock 1 Hold down EASY TIMER so that “DAY” appears in the display window. However, if the clock has already been set, the current setting appears. 2 Turn EASY TIMER to set the day. 3 Press EASY TIMER. MONTH indicator and “1” appear in the display window. 4 Turn and press EASY TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window. 5 Turn and press EASY TIMER to set the hour and minute. 6 When you have finished setting the time, press EASY TIMER to start the clock. Tips • To cancel a Easy Timer setting, press x STOP on the VCR while you are making the setting. • To record NTSC signals in EP mode, set the tape speed to LP. Even when timer recording is set to LP mode, NTSC signals are automatically recorded in EP mode. Notes • If eight programmes have already been set using the TIMER PROGRAMMING menu, “FULL” appears in the display window for about five seconds. • The indicator flashes in the display window when you complete the setting in step 11 with no tape inserted. • When the time is set incorrectly, “ERROR” appears in the display window in step 11. Set the timer again from step 1. continued Recording TV programmes using the Easy Timer (continued) About the Demonstration Mode The Easy Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Easy Timer. It cancels the “FULL” notice which appears if eight programmes have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X PAUSE on the VCR while turning the EASY TIMER. “DEMO” appears in the display window for a few seconds. To cancel the ...
Este manual também é adequado para os modelos :VCR jogadores / vídeo - SLV-ED323SG (263.56 kb)