|
por este dispositivo também tem outras instruções :
Facilidade de uso
rqt6912-ye_p26-49.qxd 04.12.14 4:40 PM ページ46
Glossary
Specifications
Bitstream
Frame still and field still
∫ Main unit
Battery pack CGR-H604 (lithium ion):
The digital form of multi-channel data (e.g.,
Frames are the still pictures that make moving
Discs played:
DVD-RAM (DVD-VR format)
Voltage:
7.2 V
5.1 channel) before decording.
pictures. About thirty are shown each second. A
DVD-Video, DVD-Audio
Capacity:
3000 mAh
Decoder
frame still may appear blurred but overall quality
Music CD [CD-DA (CD-TEXT compatible)]
Dimensions (excluding protrusions):
A decoder restores the coded audio signals on
is high.
Video CD
232 (W)k173.5 (D)k30.7§ (H) mm
DVDs to normal. This is called decoding.
Two fields appear alternately to make up one
CD-R/CD-RW [CD-DA (CD-TEXT compatible),
[92⁄16q (W)k627⁄32q (D)k17⁄32q (H)]
§
Dolby Digital
frame. A field still is not blurred but picture
Video CD, MP3, WMA, JPEG,
24.6 mm (31⁄32q) at lowest point
This is a method of coding digital signals
quality is lower.
HighMAT Level 2 (Audio and Image)]
Mass:
1200 g (42.3 oz.)
developed by Dolby Laboratories. Apart from
Interlace and progressive output
DVD-R (finalized as DVD-Video)
∫ Multi cradle
stereo (2-channel) audio, these signals can also
NTSC, the video signal standard, has 480
SD played:
Composite-video output:
be multi-channel audio. A large amount of audio
interlaced (I) scan lines, whereas progressive
Media:
SD Memory Card
Output level:
1 Vp-p (75 ≠)
information can be recorded on the disc using
scanning uses twice the number of scan lines.
Image:
JPEG
Output terminal:
RCA pin-jack
this method.
This is called 480P.
Video:
MPEG4
Number of terminals:
1 system
Dolby Pro Logic
I/P/B
Voice:
G.726
S-video output:
A surround system where a 4-channel audio
MPEG 2, the video compression standard
Audio:
MPEG2-AAC, MP3
Y output level:
1 Vp-p (75 ≠)
track is recorded as 2 channels and then is
adopted for use with DVD-Video, codes frames
(Sampling frequency:
C output level:
0.286 Vp-p (75 ≠)
restored to 4 channels for play. The surround
using these 3 picture types.
32 kHz, 44.1 kHz, 48 kHz)
Output terminal:
S-video jack
channel is monaural and can reproduce up to
I:
Intra coded picture
Signal system:
NTSC
Number of terminals:
1 system
7 kHz.
This picture has the best quality and is the
LCD screen:
9q α-Si, TFT wide-screen LCD
Component-video output
DTS (Digital Theater Systems)
best to use when adjusting the picture.
(VGA 800k480kRGB pixels)
(Progressive compatible):
This surround system is used in many movie
P: Predictive coded picture
Composite-video output/input:
Y output level:
1 Vp-p (75 ≠)
theaters around the world. There is good
This picture is calculated based on past I or
Output/input level:
1 Vp-p (75 ≠)
PB output level:
0.525 Vp-p (75 ≠)
separation between the channels, so realistic
P-pictures.
Output/input terminal:
Mini-jack
PR output level:
0.525 Vp-p (75 ≠)
sound effects are possible.
B: Bidirectionally-predictive coded picture
Number of terminals:
1 system (output/input)
Output terminal:
RCA pin-jack
Dynamic range
This picture is calculated by comparing past
Audio output/input:
Number of terminals:
1 system
Dynamic range is the difference between the
and future I and P-pictures so it has the
Output/input level:
1.5 Vrms
Audio output:
lowest level of sound that can be heard above
lowest volume of information.
(1 kHz, 0 dB, 10 k≠)
Output level:
1.5 Vrms (1 kHz, 0 dB, 10 k≠)
the noise of the equipment and the highest level
Linear PCM (pulse code modulation)
Output/input terminal:
Stereo mini-jack
Output terminal:
RCA pin-jack
of sound before distortion occurs.
These are uncompressed digital signals, similar
Number of terminals:
1 system (output/input)
Number of terminals:
5.1 ch discreet output
Film and video
to those found on CDs.
Audio performance:
1 system
DVD-Videos are recorded using either film or
Playback control (PBC)
(1) Frequency response:
Included speakers:
2 Wi2 W stereo output
video. Usually, film is recorded at 24 frames per
If a Video CD has playback control, you can
(1) ≥DVD (linear audio):
Power supply:
DC 9 V (DC IN terminal)
second, the rate movies are filmed at, while
select scenes and information with menus.
4 Hz–22 kHz (48 kHz sampling)
Power consumption
video is recorded at 30 frames per second.
4 Hz–44 kHz (96 kHz sampling)
(using included AC adaptor):
(1) ≥DVD-Audio:
27 W (when connected
4 Hz–88 kHz (192 kHz sampling)
to main unit and playing)
Product Service
(1) ≥CD audio:
4 Hz–20 kHz
Dimensions (excluding protrusions):
(2) S/N:
238 (W)k182 (D)k38 (H) mm
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(1) ≥CD audio:
115 dB
[96⁄16q (W)k73⁄16q (D)k11⁄2q (H)]
1. (a) The AC power supply cord or AC adaptor has been damaged; or
(3) Dynamic range:
Mass:
680 g (24.0 oz)
1. (b) Objects or liquids have gotten into the unit; or
(1) ≥DVD (linear audio):
98 dB
∫ Common
1. (c) The unit has been exposed to rain; or
(1) ≥CD audio:
97 dB
Operating temperature range:
1. (d) The unit does not operate normally or exhibits a marked change in performance; or
(4) Total harmonic distortion:
i5 to i35 oC (i41 to i95 oF)
Reference 1. (e) The unit has been dropped or the cabinet damaged.
(1) ≥CD audio:
0.008 %
Operating humidity range:
Reference
2. Servicing—Do not attempt to service the unit beyond that described in these operating
Digital audio output:
10–80 % RH (no condensation)
instructions. Refer all other servicing to authorized servicing personnel.
Output terminal:
Mini optical terminal
AC adaptor:
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the
Number of terminals:
1 system
Power source:
AC 100–240 V, 50/60 Hz
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
(also used for audio output/input)
Power consumption:
38 W
substitutes may result in fire, electric shock, or other hazards.
Built-in speakers:
1 Wi1 W stereo output
DC output:
9 V, 2500 mA
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that
Pickup:
Note
the unit is in proper working condition.
Wave length:
658 nm/790 nm
Specifications are subject to change without
Laser power:
CLASS II/CLASS I
notice.
Power supply:
DC 9 V (DC IN terminal)/
Product information
Mass and dimensions are approximate.
DC 7.2 V (Battery terminal)
For product information or assistance with product operation:
Power consumption
Power consumption in standby mode
In the U.S.A., refer to “Customer Services Directory” on page 49.
(using included AC adaptor):
(using included AC adaptor):
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505,
17 W (Unit only: 13 W)
Main unit:
0.8 W
RQT6912
RQT6912
or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.
Recharging 13 W
Multi cradle:
0.9 W (when connected
46
to main unit)
47
...