Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
To Programme with the
7
ShowView Function
Press the TIMER REC button D to switch the VCR
over to the timer recording standby mode.
The ShowView numbers assigned to each TV programme
≥ Check that “Á” is lit on the VCR display.
and published alongside the TV programme listings in
If it is flashing, check the timer recording details
newspapers and magazines make it extremely easy to set the
again. (See page 25.)
VCR for timer recording.
The duration of a timer recording programmed with
ShowView number may be slightly longer than the actual
If “– –” Appears under “Pos/Name” after
duration of the TV programme.
Entering a ShowView Number
Preparations
Pos/Name stands for Programme Position/TV Station
≥ Confirm that the VCR is on.
Name.
≥ Confirm that the TV is on and the VCR viewing channel is
Normally, the name of the TV station or the number of the
selected.
programme position is displayed under “Pos/Name”.
≥ Insert a video cassette with an intact erasure prevention
However, if the TV station information was not
tab.
automatically set during Download
Timer recording
As soon as the cassette is inserted, the Cassette Number
or Auto Setup due to adverse
Pos
Start Stop SP VPS
Name DATE
ON
OFF LP PDC Min
Check starts. Wait a few moments until it is completed.
reception conditions, the “– –”
jj jjjjj
15:00 17:00 SP
jjj
120
jjjjj
jj /jj jj jj :jj jj :jj jj
jjj
jjj
(See page 16.)
indication appears instead.
jjjjj
jj /jj jj jj :jj jj :jj jj
jjj
jjj
jjjjj
jj /jj jj jj :jj jj :jj jj
jjj
jjj
jjjjj
jj /jj jj jj :jj jj :jj jj
jjj
jjj
≥ Set the VCR/TV switch P to “VCR”.
In such a case, follow the
jjjjj
jj /jj jj jj :jj jj :jj jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
operation steps below to correct it.
“– –” indication
Example:
Programming a timer recording of a TV programme with the
Press the Channel button : repeatedly to select the
ShowView number 920126
programme position on which the TV programme to be
recorded will be broadcast.
Operations
After you have entered the information of a TV station, it
1
remains stored in the VCR’s memory, and you do not need
Press the SHOW VIEW button L to display the
to enter it again in the future.
menu for entering the ShowView number on the TV.
2
Press the Numeric buttons 2 to enter the
If “Pos/Name” (Programme Position) Is Not
ShowView number.
On Screen Display
Entered Correctly When Programming with
≥ If you have entered a
wrong digit, press the
the ShowView Function
ShowView
Cursor button (2) R
See steps 1–3 on page 42.
9 2 0 1 2 6
and then enter the
14
Press the Cursor buttons (3421) R to select the TV
correct digit.
station which you want to delete.
15
Press the Channel button (J, red) : and the OK button
3
Press the OK button T to display the programmed
T to delete the incorrect programme position (Delete).
content.
16
Press the DATE button (i, green) ; and the OK button
T to insert a blank programme position (Add).
4
Press the SP/LP button E to set the desired tape
17
Press the OK button T to display the Manual Tuning
speed.
menu.
Timer recording
≥ SP provides standard
Pos
Start Stop SP VPS
18
Press the Numeric buttons 2 to enter the channel
Timer Recording
recording time and optimum
Name DATE
ON OFF LP PDC Min
ZDF
27/10 We 20:00 21:30 SP
OFF
90
number of the desired TV station and press the
jjjjj
jj/jj jj jj:jj jj:jj
jj
jjj
jjj
picture quality.
jjjjj
jj/jj jj jj:jj jj:jj
jj
jjj
jjj
OK button T.
jjjjj
jj/jj jj jj:jj jj:jj
jj
jjj
jjj
LP provides doubled
jjjjj
jj/jj jj jj:jj jj:jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
19
Press the Cursor buttons (3421) R to select the
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
recording time with slightly reduced picture quality.
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
entry field for “Name”.
EP provides triple recording time with slightly
10
Use the Cursor buttons (3421) R and the OK button
reduced picture quality.
T to enter the station name.
Regarding the “A” indication, refer to page 24.
≥ If the station name needs a blank space, select the
≥ To extend the ending time or to make any
blank between “Z” and “¢”.
corrections, use the Cursor buttons (3421) R,
11
Press the EXIT button S to exit the On Screen Display.
the Channel button :, the DATE button ;, the ON
12
Perform the operation of the ShowView function.
button G, the OFF button F, the SP/LP button E.
≥ See page 24 for VPS/PDC recording.
To Suspend the Timer Recording Standby
5
Mode
Press the TAPE button C to select the
See page 22.
corresponding cassette tape length.
≥ The tape length is displayed on the VCR display.
Notes:
6
Press the OK button T again to conclude the
≥ If the VCR is not put in the timer recording standby mode at
the latest 10 minutes before the programmed timer
settings.
Timer recording
recording starting time, the “Á” indication flashes on the
≥ To programme additional
Pos
Start Stop SP VPS
Name DATE
ON OFF LP PDC Min
VCR display. In this case, press the TIMER REC button D
timer recordings, repeat
ZDF
27/10 We 20:00 21:30 SP
OFF
90
jjjjj
jj/jj jj
jj:jj jj:jj
jj
jjj
jjj
to put the VCR in the timer recording standby mode.
operation steps 1–6.
jjjjj
jj/jj jj
jj:jj jj:jj
jj
jjj
jjj
jjjjj
jj/jj jj
jj:jj jj:jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
≥ Recording in the S-VHS format is not possible in the EP
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
mode.
23
...