Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
If the switch is in the AUTO position, iris data will not be stored in the memory. © Lens Iris Control [IRIS, LEVEL] When IRIS AUTO/MANU Switch © is in the MANU position, the iris can be controlled over the range from the closed position to the fully open position using this control. Turning it clockwise opens the iris and turning it counterclockwise closes the iris. If the camera is preset to AUTO IRIS ADJ ON when IRIS AUTO/MANU Switch © is in the AUTO position, this control may be used for fine adjustment of ALC focus level. For details, refer to the Operating Instructions for the Camera. If the preset memory is called by pressing PRESET Switches © when IRIS AUTO/MANU Switch © is in the MANU position, the iris is adjusted to the preset value stored in the memory regardless of the position of this control. If the control is turned after that, the iris is adjusted corresponding to the position of the control. © Preset Memory Switch [MEMORY] Head pan/tilt positions, lens zoom/focus/iris (provided that IRIS AUTO/MANU Switch © is in the MANU position), and camera white balance (ATW Channel A or B) can be preset in up to 10 memory buttons. To preset them in these buttons, first select a head pan/tilt position, lens zoom/focus/iris, or camera white balance (ATW or Channel A or B); press MEMORY Switch © (so it lights yellow green and all the 10 buttons of PRESET Switches © flash); while keeping the MEMORY Switch © depressed, press one of the 10 buttons of PRESET Switch © as desired. The pressed button in which the selected item is stored lights. © Preset Position Selection Switches [PRESET] The head pan/tilt positions, lens zoom/focus/iris, and camera white balance that are stored in the buttons of PRESET Switch © can be recalled to operate the pan/tilt head, the lens, and the camera according to the preset data. To preset them in the PRESET switches, first select a head pan/tilt position, lens zoom/focus/iris, or camera white balance (ATW or Channel A or B); press the MEMORY Switch © (so it lights yellow green and all the 10 buttons of PRESET Switches © flash); at the same time press one of the 10 buttons of PRESET Switches © as desired. The pressed button in which the selected item is stored lights. © Speed Selection Switch [SPEED] If ZOOM lever ©, FOCUS Lever ©, or PAN/TILT Lever © is moved while keeping SPEED Switch © depressed, the corresponding operation takes place at low speed, provided that SPEED SW CHANGE Switch © is in the LOW position. If one of these levers is moved with SPEED Switch © depressed when SPEED SW CHANGE Switch © is in the HIGH position, the corresponding operation takes place at high speed. SPEED Switch © remains lit while it is kept depressed. © Defroster Switch [DEF, ON/OFF] If this switch is connected to a pan/tilt head with a built-in defroster function, it switches on and off the defroster. Wiper Switch [WIP, ON/OFF] If this switch is connected to a pan/tilt head with a built-in wiper function, it switches on and off the wiper. ® Heater/Fan Switch [H/F, ON/OFF] If this switch is connected to a pan/tilt head with a built-in heater or fan function, it switches on and off the heater or fan. © Lens Extender Switch [EXT, ON/OFF] If this switch is connected to a lens with a built-in extender function, it switches on and off the lens extender. For details, refer to the Operating Instructions for the Lenses and Pan/tilt Head. © ND Filter Switch [ND, ON/OFF] If this switch is connected to a lens with a built-in ND filter function, it switches on and off the ND filter. For details, refer to the Operating Instructions for the Lenses and Pan/tilt Head. ® Option Switch [OP, ON/OFF] Controls the option switch terminal on the Pan/tilt Head AC Adapter (AW-PS300) to short circuit or open it. That is, the option switch terminal is shorted when OP ON/OFF Switch ©is in the ON position, or is opened when it is in the OFF position. For details, refer to the Operating Instructions for the Pan/tilt Head AC Adapter. Zoom Lever [ZOOM, TELE/WIDE] Controls the lens zoom. Zoom speed varies according to the angle of the lever. The lens moves toward TELE when the lever is moved toward TELE, or toward WIDE when the lever is moved toward WIDE, provided that ZOOM REVERSE Switch © is in the NOR position. When ZOOM REVERSE Switch © is set to the REV position, the lens moves in the opposite direction. ZOOM/FOCUS EXCHANGE Switch © may be used to exchange its function with FOCUS Lever ©. Focus Lever [FOCUS FAR/NEAR] Used to adjust the lens focus at varying speed depending on the angle of the lever. The lens is focused far when the lever is moved toward FAR, or near when the lever is moved toward NEAR, provided that FOCUS REVERSE Switch © is in the NOR position. When FOCUS REVERSE Switch © is set to the REV position, the lens focus operates in the opposite direction. ZOOM/FOCUS EXCHANGE Switch © may be used to exchange its function with ZOOM Lever ©. © Pan/tilt Lever [PAN/TILT, UP/DOWN/LEFT/R...