Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
(Usually, the modification of default configuration is not required when a network card is installed.) WJ-SX650 Series Initial Setup Tool has the following configuration menus: • RS485 Camera This menu is used for RS-485 camera settings. Factory default: All coaxial cameras Note: WJ-MPU955A Administration Console cannot config ure the RS-485 camera settings for the matrix switcher. • OSD Character Font This menu is used for adjusting the OSD font. When a user set the camera title with WJ-MPU955A Administration Console, the expected font is not displayed on monitors. However, the user can change the SX650 Text Code by selecting from the font list. Factory default: Normal ASCII code • Alarm Input State In this menu, the user can reverse Normally Open contact and Normally Close contact for alarm input ports. Factory default: Normally Open • Ethernet Communication This menu is used for the Ethernet Communication Property. Select "Auto Negotiation". Factory default: Auto Negotiation Notes: • To prevent misuse, be sure to change the factory default user name and password. The user name and password can be changed by clicking "User setup" and changing the settings. • If the matrix switcher has Video Output Board 2, update the firmware version of Video Output Board 2 by performing Step 3 to 7. Installation and Uninstallation Installation 1. Insert the supplied CD-ROM into the CD-ROM drive on the PC. 2. Double-click "setup.exe" in the "Setup_Tool" folder of CD-ROM. The installation wizard will be displayed on the PC screen. 3. Follow the instruction message on the PC screen to complete the installation. Note: In the factory default installation, C:\Program Files\ Panasonic\WJ-SX650Cnfg is created, and files will be copied to the directory. Uninstallation 1. Select "Control Panel" – "Add/Remove Programs". "Add/Remove Programs" window will be displayed on the PC screen. 2. Select "WJ-SX650 Series Initial Setup Tool". 3. Click "Remove" or "Change/Remove", and follow the directions. Note: If WJ-SX650 Series Initial Setup Tool has already been installed on a PC, installation is impossible. Install the application again after uninstallation. Starting Up Note: The following is the procedure when using the Windows XP operating system. 1. Select "Start" – "All Programs" – "Panasonic" – "WJSX650 Series" – "WJ-SX650 Series Initial Setup Tool x.xx". (x.xx is the version number.) Then, run the program. WJ-SX650 Series Initial Setup Tool will start up, and the login window will be displayed on the PC screen. 2. Enter the user name and password. The factory default is as follows. User Name: admin Password: sx650 3. Click "OK". "WJ-SX650 Series Initial Setup Tool" window is displayed. 4. To download setting data from WJ-SX650 Series, click on the icon pointed in the illustration. "Download" window will be displayed. 5. Click on "Start Download". The setting data will be downloaded from WJ-SX650 Series to the PC. Note: Connect the SERIAL port of WJ-SX650 Series and PC. (Refer to the illustration of