Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
Refer servicing to qualified service personnel. 2. Handle this camera with care. Do not abuse the camera. Avoid striking or shaking it. The camera could be damaged by improper handling or storage. 3.Do not expose the camera to rain or moisture and avoid operation in wet areas. Take immediate action if the camera should become wet. Turn power off and request servicing to qualified service personnel. Moisture can damage the camera and also create the danger of electric shock. 4.Never aim the camera at the sun. Whether the camera is in use or not, never aim it at the sun or an extremely bright object as this could cause smear. 5. Do not use the camera beyond its temperature, humidity or power source ratings. 5-1 .Designed for indoor use. Ambient temperature must not range beyond -10'C - +50"C. 5-2.Avoid using the camera when humidity is above 90%. -2- ENGLISH MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS (D©®© 1. AGC ON/OFF Switch (AGC ON/OFF) This switch is used to select the gain of the video amplifier as follows. ON : The lens iris is fully operated at low light shooting, a clear picture is obtained by automatic increase of the gain. OFF : A natural and low-noise picture is obtained under a low light condition. Note : This switch is preset to the ON position at the factory. 2. Back Light On/Off Switch (BLC ON/OFF) When back light affects the picture, set this switch to ON position for a clear picture. See page 4 for more details. 3. Picture Detail Selection Switch (PICTURE SHARP /SOFT) This switch is used to select the sharpness of the picture. SHARP : The sharp picture is obtained. SOFT : The soft picture is obtained. Notes : 1 .When connecting the WJ-450 Color Quad Unit to this camera, set this switch to the SOFT position. 2.This switch is preset to the SHARP position at the factory. 4. Microphone On /Off Switch (MIC ON/OFF) By setting this switch to the ON position, the audio function can be obtained. 5. Audio Control (AUDIO, MAX /MIN) The audio level can be adjusted by turning this control. This is preset to the MAX position at the factory. Camera Fixing Angle 6. Auto Light Control (ALC, H / L) This control should be used only for shooting the object in unusual lighting condition. Do not adjust this control except the above condition. Note : To use this control, be sure to set the Back Light On / Off Switch (2) to the OFF position. 7. Video Output Jack (VIDEO OUT) This jack is used to adjust the angular field of view or focus while observing the picture on the monitor. -3- 8. Panning Table This is used to adjust the Right/Lett Angle of the camera. 9. Camera Head This is used to adjust the Up /Down Angle of the camera. 10. Focus Ring This is used to adjust the focus. 11. Zoom Ring This is used to adjust the angle of view. 12. Lens Holders These are used to adjust the picture tilt. 13. Dome Cover This cover is used to protect the camera head. 14. Microphone Holes 15. Hooks These are used to mount this unit to the Camera Fixing Angle. 16. F-socket This socket is connected with the F-plug (18) on the Camera Fixing Angle. 17. Coaxial Cable Clamp 18. F-plug (Refer to the ADSUTMENT on Page 7 for details) This plug is used to connect with the F-socket (16) on the camera head. 19. Video Output Terminal This terminal is used to connect the coaxial cable between the camera and the Camera Drive Unit WV-PS11A , Colour Video Monitor WV-CM110A or the equivalent. BLC (Back Light Compensation) Description When strong, unwanted background lighting interferes with the clarity of important scene objects, turn the BLC On/Off Switch (2) to the ON position. Cautions : 1. Setting the BLC On / Off Switch to the "OFF" position is recommended when using a pan / tilt head or if the scence object has rapid changes in illumination, since the speed of lens iris becomes slow in the "ON" position, 2. If the desired scene objects are not in the center of the picture, back light compensation may not work effectively. INSTALLATION -4- INSTALLATION Mounting the Camera Fixing Angle 1-1. Make a hole (Diameter 75mm) in the ceiling board in the desired location. 75 2. Mounting the camera onto the Camera Fixing Angle (provided). 2-1 .Remove the Dome Cover (13) from the camera by turning it counterclockwise. Ceiling board '////// 1 Mounting hole 1-2.After completing the cable preparation, fix the coaxial cable to the Camera Fixing Angle. Turn to counterclockwise Dome Cover 2_2. Match “A" on the camera to “B" of the Camera Fixing Angle and insert the camera into the Camera Fixing Angle. 1-3.Fix the Camera Fixing Angle onto the ceiling board by using four Camera Fixing Angle Mounting Screws. Camera Fixing Angle Note : 1 .Match ‘'1}” of the REAR ft LOWER/ FRONT ft UPPER to the desired position. 2_3.Turn the camera toward the LOCK direction so that “A" is brought to the center of "C”. 2-4.Set the Fall Prevention Cap (provided) to prevent the camera body from falli...