Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
please rood :-«г rsrj“cnsecmctocet> CAUTION : When the lens becomes dirty, wipe it using a dry and scrt doth or a cloth soaked with alcohols. Ho not use chemical e.g thinner or benzine for cleaning because this may damage the surface (1) Make sure the Selection switch on the camera is set to DC position. {Fig. 1) Fig.l Notes : • Some cameras do not have the Lens Selection Switch. • The site of Lens Selection Switch is different by ;he cameras. Caution : Always set the flange-back adjusting ririg to fully clockwise {C-mount side) by loosing screws in the ring before mounting the lens. The inner glass and CCD image sensor might be damaged by the lens otherwise. (2)a) Installation for Color Camera Mount the lens onto the lens mount of camera by rotating it gently clockwise until it stops. Then turn the lens furthermore with a little bit stronger torque to the desired position. (Fig. 2) b) Installation for Black/White Camera Precaution: When this lens is used with a B/W camera, in order to have an optimum de finition, the glass-block and frange-back adjusting piate shou d Ce attached with. (b-l)lnsert a glass-block by rotating clockwise onto the lens and cu: a flange-back adjusting plate on the lens. (b-?)Thon mount the ions onto the lens mount of camera by rotating them gently clockwise until they stop. Then turn the ions furthermore with a little bit stronger torque to the desired position. (Fig. 3) (3) Connect the lens cable lo the Lens Connector on the side of the camera. (4) Adjust the backtoous of the camera by turning the flange-back adjusting ring to the desired position. Caution : Do not turn this ring too much ccjnterclockwise as Hi s might damage the inner glass and CCD image sensor. Tighten the screw on the flange-back adjusting ring {Fig 3) Fig. 2 Fig.4 \ Glass>i>ock Flange-back ad;.ist mg plate Specification Comparison Models Specifications WV-LA210C3 (Super Wide-angle) WV-LA408C3 (Wide-angle) WV-LA908C3 (Standard-angle) Image Size 06 mm (4.8(H) x 3.6{V) mm) 06 mm (4.8(H) x 3.6(V) mm) 06 mm (4.8(H) x 3.6(V) mm) Focal Length 2.1 mm 4.5 mm 9 mm Maximum Aperture Ratio 1 : 1.0 1 :0.75 1 :0.75 Angular Field H 107.6° 57.2° 31.3° of View V 88.0° 43.7° 23.5° Focusing Range Adjusted by Camera Adjusted by Camera Adjusted by Camera Mount CS-mount, 1'-32UN CS-mount, r-32UN CS-mount, T-32UN Filter Size - M40.5 P=0.5 M40.5 P=0.5 Dimensions 2-7/16“ x 2-1/16'x 1-7/16’ 2-7/16" x 2-1/16’ x.2-1/16’ 2-7/16’x 2-1/16’x 2-1/16* (WxHxD) (62.5x52x36.5 mm) (62.5 x 52 x 53 mm) (62.5 x 52 x 53 mm) Weight 0.2 lbs (110g) 0.3 lbs (140g ) 0.3 lbs (135g) Ambient Operating Temperature 22°F - 140°F {-30°C - +60°C) 22°F - 140°F (-30°C - +60°C) 22°F - 140°F (-30°C - +60°C) • Dimensions and weight indicated are approximate. • Specifications are subject to change without notice. Accessories Glass-Block....................................................................................................................1 pc Flang-Back Adjusting Plate...........................................................................................1 pc Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America CLOSED CÎRCUIT VIDEO EQUIPMENT DIVISION Executive Office: One Panasonic Way, Secaucus, New Jersey 07094 Regional Offices: Northeast: 43 Hartz Way, Secaucus, NJ 07094 (201 ) 348-7303 Southeast: 1854 Shackleford Court. Suite 115, Norcross, СА 30003 {404) 717-6835 Midwest: 1707 North Randall Road, Elgin. IL 6012Э (708) 468-5200 Southwest: 4500 Amon Carter Blvd., Ft. Worth, TX 76155 (817) 685-1117 Western: 6550 Katella Ave., Cypress, CA 90630 {714) 373-7265 MATSUSHITA ELECTRIC OF CANADA LIMITED 5770 Ambler Drive. Mississauga, Ontario, L4W 2T3 Canada {905)624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park, 65th Infantry, Ave. KM. 9.5 Carolina, Puerto Rico 00630 (609...