Assessments - 3, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
100BT LAN connector 100 Base-TX compatible (compliant with IEEE 802.3af) 1-13 Bottom The MAC address and serial number required for the network settings are printed on the bottom of the camera. Make a note of them before installing the camera. Screw hole for tripod mounting Safety wire anchoring point If the camera is installed on the ceiling using an optional Indoor Dome Housing or Ceiling Mount Cover, attach the safety wire included in the bundled options. Screw hole for Ceiling Bracket Used for the in-ceiling bracket of an optional Indoor Dome Housing or the ceiling mounting bracket of a Ceiling Mount Cover. Serial No. Camera’s serial number is printed here. MAC address Unique address to this camera. Please make a note before installing this unit (> P.2-9). s Please purchase optional components separately as required. Ceiling Mount Cover SS60-S-VB/SS60-B-VB Optional Ceiling Mount Cover is available for VB-C60 only. Two colors are available, Silver (SS60-S-VB) or Black (SS60-B-VB), for use with VB-C60 (silver) and VB-C60B (black) respectively. Using example Before Using VB-C60 Indoor Dome Housing VB-RD51S-C/S Optional Indoor Dome Housing is available for VB-C60 only. The dome is available in Clear (VB-RD51S-C) and Smoked (VB-RD51S-S). The dome can be inset into the ceiling for a sleek and stylish installation. 1-15 Smoked type (VB-RD51S-S) • Light transmittance: approx. 50% • Minimum subject illumination: Day mode: 1.4 lux (1/30 sec., color) Night mode: 0.4 lux (1/30 sec., monochrome) (> P.3-3) The figure shows the Clear dome. Using example Note .It is strongly recommended to use VB-C60B when using a dome housing, since the camera’s lens ring (lens frame) reflects off the dome’s inner surface less than VB-C60. .When using a camera with a dome housing, the viewing angle is a little wider than normal. AC Adapter PA-V17 Optional AC adapter PA-V17 is available for VB-C60 only. Use the AC adapter when the PoE HUB or external power supply is not used. VK-Lite Additional Viewer License VK-Lite additional Viewer License is a license for additional viewers, which is required for each PC where VK-Lite Viewer is installed. For example, you need to purchase the licenses for a monitoring system, where users use multiple viewers at multiple locations to monitor the video. Network Video Recorder VK-64/VK-16 v2.0 VK-64/VK-16 is for viewing and recording video distributed from network cameras. It is useful Before Using VB-C60 when using multiple network cameras. Note VB-C60 is not supported by the older versions of VK-64/VK-16. If using an older version, you need to upgrade VK-64/VK-16 to the latest version. Visit Canon Web site for the details. VK-64/VK-16 Screen Example Tip “VK-Lite”, a simplified version of “VK-64/VK-16 v2.0”, is bundled with VB-C60 (> P.1-6). Up to 4 cameras can be registered to VK-Lite. 1-17 8 Initial Setting and Installation This chapter explains how to install a camera. First, install required software from the Setup CD-ROM. Then connect the camera to the network and carry out the initial settings. Check the image on VB-C60 Viewer and then install the camera. Please set the camera IP address before installing the camera. 2-2 Setup Procedure Step1 Software Installation Insert bundled Setup CD-ROM into the PC and install the software (> P.2-4). Bundled Setup CD-ROM LAN cable VB-C60 PC PC PoE HUB The illustration shows the camera connected via a PoE HUB. Connect a camera and PC to the network (> P.2-6). If you are using a PoE HUB or Midspan, contact your Canon sales representative. Step2 Connection to the Network Step4 Camera Installation Place or install the camera securely Initial Setting and Installation Start up VB Initial Setting Tool and carry out initial settings for the camera (> P.2-9). Check the image on VB-C60 Viewer (> P.2-12). Step3 Initial Setting VB Initial Setting Tool window VB-C60 Viewer (> P.2-14). The illustration shows an installation example using optional Ceiling Mount Cover. 2-3 n Installing Software Install required software from the bundled CD-ROM (> P.1-6). Software for initial settings and management Type Description VB Initial Setting Tool A tool for initial camera settings (> P.2-9) Only the administrator needs to install this tool. VBAdmin Tools Software for managing the camera (> dOperation Guide, Chapter 2). Only the administrator needs to install this software. . Install this software from “VBToolsInstall.exe” in the “VBTools” folder on the Setup CD-ROM. Recording software Type Description Network Video Recorder VK-Lite Software for displaying and storing video from cameras. It consists of “Storage Server” and “Viewer” (> P.1-6). . Install this software from “VKLiteInstall.exe” in the “VBTools” folder on the Setup CD-ROM. Note To view MPEG-4 video from the camera, you need VK-Lite Viewer. The built-in VB-C60 Viewer can only display JPEG video. Built-in Software (no installation required) Type Description VB-C60 Viewer Software for displaying video from the camera. VB-...