Assessments - 5, GPA: 3.4
(
)
)
|
Facilidade de uso
( - ) Disables recording at that time schedule. 3.7 SUB MENU The SUB MENU allows you to enable password setup, change the password, system date and time, motion setup, and VGA display settings. 20 SUB MENU > PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP PASSWORD SETUP NO PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 3.7.1 PASSWORD CHANGE To change the password: 1. Input the prompted information: CURRENT PASSWORD : -----NEW PASSWORD : -----CONFIRM PASSWORD : ----- The factory default password is "111111". Use the following front panel buttons to input a numeric password: For "1" For "2" For "3" For "4" 2. The "Password changed" message is then displayed. This message flashes three times, and then you will be returned to the SUB MENU. Note: You will be prompted to enter the password when you attempt to format the hard drive(s) in the HARD DRIVE SETUP menu. 21 3.7.2 TIME SET TIME 2004/01/10 15:30:25 ^ PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT To change the system date and time: 1. Press ..or ..to move through the "year/month/day" and "hour:minute:second " entries. The "^" cursor indicates the entry that is selected. 2. Per selected entry, press repeatedly to cycle through the numbers. Stop pressing the button when you reach the desired number. 3.7.3 VGA SETUP VGA SETUP > RESOLUTION 1024 ^ 768 REFRESH RATE 60HZ PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT Set RESOLUTION and REFRESH RATE based on the supported display mode and refresh rate of the VGA monitor that is connected to the DVR unit. Different monitors support different refresh rates: Resolution Refresh Rate Frequency (Hz) 640 x 480 60, 72, 75, 85 800 x 600 60, 72, 75, 85 1024 x 768 60, 70, 75, 85 1280 x 1024 60 Note: The best refresh rate for LCD monitor is 60Hz. 22 3.7.4 MOTION SETUP MOTION SETUP >MOTION CAMERA _ _ _ _ MOTION SENSITIVITY MOTION RECORD TIME 01 05 PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT To change MOTION CAMERA, 1. Press ..or .. to move the arrowhead cursor to MOTION CAMERA in the menu. 2. Press the channel buttons to select cameras that you want to setup. To setup all cameras, press . You will see the screen shows MOTION CAMERA 1 2 3 4. Press the same button again to cancel the setting. To setup channel 1 and 4 only, press . You will see the screen shows MOTION CAMERA 1 4.Press the same buttons again to cancel the setting. To setup channel 2 and 3 only, press . You will see the screen shows MOTION CAMERA 2 3 . Press the same buttons again to cancel the setting. To adjust MOTION SENSIVITY, 1. Press ..or ..to move the arrowhead cursor to MOTION SENSITIVITY in the menu. 2. Press repeatedly to cycle through the numbers. The sensitivity level ranges from 1 to 10. Level 10 is the least sensitive one and Level 1 is the most sensitive one. To setup the MOTION RECORD TIME, 1. Press .. or .. to move the arrowhead cursor to MOTION RECORD TIME in the menu. 23 2. Press repeatedly to cycle through the numbers. The time setting ranges from 5 to 30 seconds. Stop pressing the button when reach the desired numbers. 3.7.5 PASSWORD SETUP SUB MENU PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP > PASSWORD SETUP NO PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT You can change the PASSWORD SETUP setting under the SUB MENU to enable PASSWORD SETUP. PASSWORD SETUP function protects your system from someone who intends to interrupt the recording or change the settings. The default setting for the PASSWORD SETUP is NO. Please move the arrow cursor to PASSWORD SETUP and press to adjust the setting to YES, and press to return to MAIN MENU. After the function is enabled, the system will request for the password before you enter MAIN MENU or stop the recording. After the password confirmation, you are able to stop the recording or enter the MAIN MENU to change the setting. 24 3.8 HARD DRIVE SETUP HARD DRIVE SETUP > OVERWRITE ENABLED YES MASTER HDD SIZE 80072MB MASTER HDD USED 16014MB 20% MASTER HDD FORMAT SLAVE HDD SIZE N/A SLAVE HDD USED N/A SLAVE HDD FORMAT PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 3.8.1 OVERWRITE ENABLED This allows old video recordings on the hard drive(s) to be automatically overwritten with new recordings when hard drive space is full. Press to enable or disable this feature (i.e., choose YES or NO). 3.8.2 MASTER HDD SIZE and MASTER HDD USED These items show the MASTER hard drive capacity and the amount of disk space that has been used up by the video recordings. 3.8.3 MASTER HDD FORMAT Press on this menu item to reformat the MASTER hard drive. You will then be prompted to enter the password. If an invalid password is entered, you will not be allowed to format the hard drive. Note: All recordings on the MASTER hard drive will be deleted when you reformat the hard drive. 3.8.4 SLAVE HDD SIZE and SLAVE HDD USED These items show the SLAVE hard drive capacity and the amount of disk space that has been used up by the video recordings. 3.8.5 SLAVE HDD FORMAT Press on this menu item to reformat the SLAVE hard drive. Y...