Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
55 Reference Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Solution No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. No picture. • TV/VIDEO mode for the recorder is set to TV. • Press TV/VIDEO on the remote control repeatedly to choose DVD mode. TV indicator disappears in the display window. • The TV is not set to receive recorder signal output. • Select the appropriate video input mode on the TV so the picture from the recorder appears on the TV screen. • The video cable is not connected securely. • Connect the video cable securely. • The connected TV power is turned off. • Turn on the TV. No sound. • The equipment connected with the audio cable is not set to receive recorder signal output. • Select the correct input mode on the audio receiver so you can listen to the sound from the recorder. • The audio cables are not connected securely. • Connect the audio cable securely. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The audio connecting cord is damaged. • Replace it with new one. The playback picture is poor. • The disc is dirty. • Clean the disc. The recorder does not start playback. • No disc is inserted. • Insert a disc. (Check that the disc indicator in the display window is lit.) • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color system, and regional code.) • The disc is placed upside down. • Place the disc with the playback side down. • The disc is not placed within the guide. • Place the disc on the disc tray correctly inside the guide. • The disc is dirty. • Clean the disc. The picture from the external input is distorted • The video signal from the external component is copy-protected. • You cannot connect via this recorder. Connect the component directly to your TV. Some channels are skipped over when using PR (+/-). • Those channels are not stored in the recorder. • Restore channels. See “Program Edit” on page 16. The picture or sound of broadcasting channel is weak or missing. • Aerial or cables are loose. • Tighten connections or replace cable. Camcorder image is not shown. • Camcorder is off. • Turn camcorder on and operate properly. Camcorder image via A/V input or DV IN to recorder is not shown on TV screen. • The recorder’s source is incorrect. • Use AV INPUT to select input channel (AV1, AV2, DV, etc.) Symptom Cause Solution Cannot play a disc recorded using this recorder on another player. • The disc was recorded in Video mode. • Finalize the disc. (page 20) • Some players will not play even a finalized disc recorded in Video mode. • No solution. • The disc was recorded in VR mode, • The other player must be RW compatible in order to play it. • Discs recorded with copy-once material cannot be played on other players. • No solution. Cannot record or did not record successfully. • The remaining blank space on the disc is insufficient. • Use another disc. • The source you are trying to record is copy protected. • You cannot record the source. • When setting the recording channel, the channel is tuned on the TV’s own tuner. • Select the channel on the recorder’s built-in TV tuner. • When recording to a Video mode disc, programs that are copy-once protected cannot be recorded. • Use a VR mode formatted disc for copy-once material. Timer recording is not possible. • Clock in recorder is not set to correct time. • Set clock to correct time. See “Auto Clock Set” or “Manual Clock Set” on page 17. • Timer has been programmed incorrectly. • Reprogram Timer. See “Timer Recording” on page 37. • Timer record indicator light does not appear after programming timer. • Reprogram Timer. Stereo Audio Record and/or Playback is not present. • TV is not Stereo-compatible. • No solution. • Broadcast program is not in stereo format. • No solution. • The recorder A/V Out jacks are not connected to TV A/V In jacks. • Make A/V connections. Stereo is available only via A/V output from the recorder. • The recorder Audio/Video Out is not selected for viewing at the TV. • Select AUX or A/V source as TV input. • The recorder’s TV audio channel is set to mono. • Set TV audio channel mode to Stereo. See “Changing TV audio channel” on page 36. The remote control does not work properly. • The remote control is not pointed at the remote sensor of the recorder. • Point the remote control at the remote sensor of the recorder. • The remote control is too far from the recorder. • Operate the remote control within 7 m. • There is an obstacle in the path of the remote control and the recorder. • Remove the obstacle. • The batteries in the remote control are exhausted. • Replace the batteries with new ones. • The remote control’s code does not match the code of other JVC device you want to operate. • Change the remote control code of the device to C code. Resetting the recorder ...you ca...