Assessments - 3, GPA: 4.7 ( )

Fabricante : Haier Arquivo Tamanho: 1.65 mb Arquivo Nome : 281abd98-3a72-43cc-b501-35ef5371fb55.pdf Língua de Ensino:

Electric water heater shall be located in a place easy for use, maintenance and with a floor drainer. In case the tank or pipes leak, nearby or lower facilities shall not be damaged. The installation location shall avoid being above toilet bowl, bathtub, washbasin or doorframe, where will cause a suppressed or unsafe feeling to users. Power socket for water heater shall be in a dry place free of water splash. (splashproof box is preferred). Do not confuse inlet and outlet water pipes. Safety valve shall be installed at designated position with no random modification. 4 Safety Precautions 220V 50Hz Haier C .....».. A...OAOUI.O. .».EOO .».EOO A...OAOUI.O. In case the power cord of the water heater is damaged, be sure to have it replaced by after service technicians with special cord offered by the manufacturer. Check if the ammeter and the diameter of the wires are in accordance with the rated current of the water heater. If necessary please have it checked by experienced electrician. The water heater adopts power supply of 220-240V , 50/60Hz. Be sure to use independent receptacle and earth it reliably. The receptacle shall comply with the stipulation of national standard. The product adopts the patent "Safe Care" technology of our company. As long as adopting civil power supply, even if the earthing wire is electrified by mistake, the "Safe Care" technology still can block the dangerous electricity, and ensure your personal safety. But if you find perceptible current, please pull off the power plug and contact local after service department for maintenance. Do not disassemble by yourself. Description of the Symbols Never do that Be sure to act as per instructions Set the receptacle of the water heater at dry position away from water spraying. Do not insert and pull the power plug with wet hands. In winter of cold area, if the heater is idle for a long period, please pull the handle of safety valve to discharge the water. Otherwise it may freeze inside the water heater and cause damages. After installation, be sure to fill the heater completely with water before switching on the power in the first usage. Children must take bath under the supervision of adult. In opening and closing the water valve, do not point the shower head to human body. Otherwise it may hurt by the spraying hot water. The water may drip from the discharge pipe of the pressure relied device and that this pipe must be installed in a continuously downward direction and in a frost-free environment. Check safety valve once a month as follow: move the small handle of safety valve, if there's water flowing out, safety valve is normal; if there's no water flow, please contact local after-sales service station. The pressure relief device is to be operated regularly to remove lime deposits and to verify that it is not blocked. NO pressure release hole 5 Setting Environment . »O .° .. °O UI .· .A AE ®. A. O· . Description of the Symbols Do not set it at place where is too cold and may freeze. Do not set at outdoor places. Do not use as floorstanding appliance. Please mount it t...

Baixe o seu

Para fazer o download, introduza 2 dígitos :