Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
The continuous-flow heater is a Class ¦¦I appliance and must be connected to the protective earth. Permanently installed appliances must be ¦¦ permanently connected to fixed wiring. The conductor cross-section must comply with the appliance being installed. The continuous-flow heater may be used only ¦¦ open (unpressurised) and for one tapping point. Caution:¦¦ Earthed water pipes may give the appearance of a connected protective earth. After installation, electrically live parts must be ¦¦ touch protected. The continuous-flow heater is suitable for con¦ ¦ nection to DVGW (German Technical and Scientific Association for Gas and Water) approved plastic pipes. The continuous-flow heater may only be installed in a frost-free room. The dismounted appliance must be stored in a ¦¦ frost-free area (residual water) and may not be subjected to frost. Repairs may only be undertaken by a suitably ¦¦ qualified specialist to avoid potential sources of danger. Persons (including children) with diminished ¦¦ bodily, sensory or mental perception, or those who lack knowledge or experience should not operate the appliance, unless they are monitored or have received instruction concerning use of the appliance by persons responsible for their safety. Keep children away from the appliance. ¦¦ Please monitor children to ensure that they do ¦¦ not play with the appliance. The warm water pipe may be hot. Please inform ¦¦ and instruct children appropriately. Please switch off all fuses immediately with ¦¦ a malfunction. Immediately shut off the cold water supply to the appliance should it leak. The malfunction can only be repaired by a specialist or an authorised service agent. EN 11 Installation (for the qualified professional) Unpacking Inspect the new appliance for transport damage!¦¦ Please dispose of the packaging, and if appli¦ ¦ cable, the old appliance in an environmentally- friendly manner. Scope of delivery Housing1 Mounting (3 screws, 3 wall plugs)2 Installation bracket3 Mounting bracket4 Aerator5 Documentation6 Product description The electronic continuous-flow heater is suitable for open (unpressurized) connections. It heats the water as it passes through the appliance. The continuous-flow heater switches on and heats the water when the warm water tap is opened. It switches off as soon as the tap is closed. The appliance may not be operated with pre-heated water, as otherwise the overtemperature protection will trip. 18514088125634 Preparations for installation Shut off the water supply before connecting ¦¦ the appliance. The electrical connection must be disconnected from the mains supply. Unscrew the fuse or switch off the circuit breaker. A clearance of about 60 mm on all sides of the appliance is required for installation. Observe the technical appliance data.¦¦ Break out the installation bracket from the rear ¦¦ of the appliance (A). Break out ¦¦one of the side knock-outs (B1) provided for an incoming electrical supply cable. Feed the desired length of the incoming electrical ¦¦ supply cable downwards through the knock-out (B2). Important:¦¦ Connect the unit only to a mains socket with protective contact that is installed according to regulations. Do not use an extension cord. If necessary, equip the unit with a longer cord. Wall mounting Attach mounting template ¦¦C to the wall. Mark the locations for the holes; drill the holes ¦¦ and insert the wall plugs. Attach the installation bracket to the wall using ¦¦ the screws (C1). Suspend the appliance in the installation bracket ¦¦ and screw it onto the mounting bracket (C2). B2B1A C2C1C Water connection The appliance is only approved for heating water ¦¦ with a specific electric resistance of . 1 300 .cm at 15 °C. Your water utility company can give you information about the specific water resistance. Installation Ensure the axial fit of the connection pipes in the ¦¦ n...
Este manual também é adequado para os modelos :Aquecedores de Água - DE1UF04/02 (2.21 mb)
Aquecedores de Água - DE1UF04/03 (2.21 mb)