Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
¦ Please inform children that the water outlet can be hot! ¦ Persons (including children) with diminished bodily, sensory or mental perception, or those who lack knowledge or experience should not operate the appliance, unless they are monitored or have received instruction concerning use of the appliance by persons responsible for their safety. ¦ Please monitor children to ensure that they do not play with the appliance. 7 GB GB Operating elements and displays (Fig. E) 1 Temperature display LED (Stage I) The LED indicates a temperature of approx. 35 °C when lit. 2 Temperature display LED The LED indicates a temperature of approx. 45 °C when lit. 3 Temperature display LED (Stage e) The LED indicates a temperature of approx. 55 °C when lit. 4 Temperature display LED The LED indicates a temperature of approx. 65 °C when lit. 5 Temperature display LED (Stage III) The LED indicates a temperature of approx. 75 °C when lit. Note: Flashing of one of the individual LEDs 1–5 indicates heating in this temperature range. 6 Button The appliance can be switched between heating and frost protection mode with button 6. In frost protection mode the appliance will automatically ensure that the water temperature is at approx. 10 °C, the tank is thus protected against frost. Only red LED 9 will light. 7 Selection button + The required temperature can be displayed and increased with button 7. 8 Selection button Note “Heat once”: If buttons 7 and 8 are pressed simultaneously for approx. 3 seconds the tank will heat up once to the set temperature. This temperature can be changed with buttons 7 + and 8 – just for this “heat once” setting. Only orange LED 9 will light. After the set temperature is achieved the appliance will immediately reassume the previously set operating state. The “heat once” function is possible in heating as well as frost protection mode. Note: Cancel the “heat once” function by simultaneously pressing buttons 7 and 8 (return to previous operating state) or by pressing button 6 (frost protection mode). 9 Operational display The LED lights red as long as the appliance is connected to the mains supply and indicates that the tank is operational. The LED lights orange for the “heat once” function. The LED flashes red to indicate a malfunction. ¦ Important: Flashing of one of the individual LEDs 1–5 in combination with the flashing red LED 9 of the operational display indicates the malfunction. Operation ¦ The appliance is switched over to heating operation with button 6. LED 3 lights and thus indicates the preset temperature stage e (approx. 55 °C, factory setting). Heating commences after about 10 seconds, LED 3 goes off and the tank heats up to about 55 °C. During the heating up phase the LEDs flash consecutively and light up permanently in order to indicate the water temperature already achieved. The set temperature is achieved as soon as all LEDs light up. ¦ Note: Only the set temperature will light if button + or – is pressed. Display set tempera...
Este manual também é adequado para os modelos :Aquecedores de Água - DG10037P/01 (342.7 kb)
Aquecedores de Água - DG10037R/01 (342.7 kb)
Aquecedores de Água - DG30037E/01 (342.7 kb)
Aquecedores de Água - DG30037P/01 (342.7 kb)