Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Maximum delivered air flow with 3-stage filtering in place is over 4 5 CFM and will clean one air change of a 4 x 4 foot room in less than four minutes while drawing less than two amps of power. This makes the Mini-Guardian HEPA System perfect for smaller remediation projects where space is at a premium and reduced air flow essential. A template on the intake grill makes it possible to take air-flow measurements with the Phoenix Kestrel 3000 Multi- Meter. The Mini-Guardian HEPA System’s 3-stage filter design with true HEPA filtration will remove virtually all hazardous particles from the air and an optional fourth stage filter of activated carbon and potassium permanganate will absorb a wide range of odors and gases. The unique 24” canister HEPA, manufactured for the Phoenix Mini-Guardian HEPA System, contains nearly 200 square feet of surface area. This allows maximum air-flow and significantly extends filter life. The Phoenix Mini-Guardian HEPA System • Less than 2 amps • Compact design • Variable speed flow • Multiple ducting options • Stainless steel cabinet • Optional fourth stage carbon filter • Wheeled cart design Phoenix Mini-Guardian HEPA System PN 4024774 Specifications subject to change without notice. Revised 1/07 Toll-Free 1-800-533-7533 • sales@thermastor.com Table of Contents Introduction ................................................................ 1. Specifications........................................................ 2. Operation ............................................................. 2. Handle Assembly Procedure............................. 2.2 Transporting the Phoenix Mini-Guardian HEPA System.................................................................2 2.3 Location .........................................................2 2.4 Electrical Requirements ...................................3 2.5 Air Ducting......................................................3 2.5A Inlet Ducting ............................................3 2.5B Outlet Ducting..........................................3 2.6 Negative Air Ducting ........................................4 2.7 Power Switch ..................................................4 2.8 Hour Meter .....................................................5 3. Maintenance.........................................................5 3. Air Filters........................................................4 3. A Carbon/Potassium Permanganate Filter .....5 3.2 Checking Airflow..............................................5 4. Service ................................................................7 4. Warranty.........................................................7 4.2 Impeller fan Replacement ................................7 5. Wiring Diagram .....................................................8 6. Service Parts ........................................................9 7. Warranty............................................................. Serial No.__________________________________ Purchase Date_____________________________ Dealer’s Name_____________________________ Read the operation and maintenance instructions carefully before using this unit. Proper adherence to these instructions is essential to obtain maximum benefit from your Phoenix Mini-Guardian HEPA System. 1 Specifications Part No. 4024774 Power 0- 20 Vac, .96 amps; 2 5 watts Blower Up to 4 5 CFM (delivered air flow w/3-stage filter operation) Filters: -stage ” Spun Polyester, 6” x 6” 2-stage 2” Pleated Media, 6” x 6” 3-stage 4” dia. x 24” Canister HEPA (optional) 4-stage 2” Carbon and Potassium Permanganate Warranty One Year, 00% Parts and Labor Dimensions Cabinet w/Cart Shipping Width 6” 9- /2” 20- /2” Height 40” 40” 47” Depth 6” 9” 20- /2” Weight 65 Lbs 70 Lbs 2 Operation 2.1 Handle Assembly Procedure Tools Required: Hex Key, 8mm (Supplied with packed parts) . Remove the handle assembly (consists of two handle brackets and handle tube), two metric socket head cap screws M 0 x 35mm length, and 8mm hex key from the packed parts supplied with the unit. Figure 1: Handle assembly Toll-Free 1-800-533-7533 2 • sales@thermastor.com 2. Locate the two mounting holes for the handle 4. Tighten each of cap screws using the 8mm hex key assembly on the Mini-Guardian HEPA System cabinet. until the handle assembly is secured against the They are located in close proximity to the top of the cabinet surface and all space between parts is cabinet near the corners. A lock nut should be visible eliminated. through each of the mounting holes and is held in place by a retainer plate secured to the cabinet shell. Verify lock nut is visible in each mounting hole. Figure 2: Mounting holes 3. Place a socket head cap screw (M 0 x 35mm) into each of the holes in the handle end brackets. Position the handle assembly up against the Phoenix Mini-Guardian HEPA System cabinet so as to align the cap screws with the mounting holes in the cabinet. It may be necessary to tilt the ha...