Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
If you have any questions or problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific Standard Time, or via e-mail at: Edelbrock@Edelbrock.com. • Description: This Edelbrock High-Flow Air Cleaner Element is designed to supply increased air flow for modified engines using the Edelbrock Power Package for Twin Cam EFI engines. It is 1/2” taller than the stock air cleaner, and also requires the use of an 8” air cleaner cover (not supplied). Note: The Edelbrock High- . .. '«¿MM Flow Air Cleaner is 1/2” taller ..;-;::Stocjk::q Edelbrock J| than stock. The taper is fMnHHHHffl reversed, which will require the *!; ! ; , 1 use of an 8” air cleaner cover. : 1 ^ : I (M'r: 1 t-ilII 1. Install the 3 supplied set screws into the original air cleaner bolt holes using a 1/8” Allen wrench. Apply a small amount of blue Loctite to the threads before installation. 2. Slip the 1/2” spacers over the set screws. 4. Install your air cleaner cover. An 8” diameter cover must be used. Notice that there are four additional holes in the air cleaner plate. These are to allow use of the filter on early OEM Harley (Magneti Marelli) fuel injection. These will be sealed when the air cleaner cover is installed. Therefore, unfiltered air will not be allowed into the engine. 3. Place the air cleaner element over the set screws and secure the air cleaner with the supplied washers and nylon locknuts. The words Twin Cam, Harley, and Harley-Davidson are registered trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, USA, and are used in this instruction sheet for reference only. Edelbrock is a registered trademark of Edelbrock Corporation 2700 California St., Torrance, CA 90503, USA Edelbrock Corporation • 2700 California St. • Torrance, CA 90503 Tech Line: (800) 416-8628 Office: (310) 781-2222 E-Mail: Edelbrock@Edelbrock.com Brochure # 63-0288 ©2004 Edelbrock Corporation Catalog # 8679 Rev. 6/04 - RS/mc...