Log:
Assessments - 3, GPA: 3.3 ( )

Instruções de Operação Holmes, Modelo HAP540

Fabricante : Holmes
Arquivo Tamanho: 356.86 kb
Arquivo Nome : af10ae74-2266-4af9-ac98-7f4d0e6c6a41.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Pull back the carbon filter to expose the HEPA filter. Match the color of the pleated HEPA filter to the colors shown on the Filter Condition Indicator label. If the filter has changed from white to a dark gray or brown color, it is time to replace the filter (Please refer to Filter Replacement Instructions). 4. If you have changed the filter it is important to reset the LCD Filter Check. Using a thin small object (such as a paper clip or pen tip) to insert in reset hole, press once to reset the display to again show "0000". The bottom of the display will have a flashing clock. This indicates that filter check is working properly. Please note that the RESET button will operate only after the display has reached 8000 hours. If reset button is pressed before 8000 hours, nothing will happen. NOTE: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargabble (nickel-cadmium) batteries. 1. After checking or replacing the filters, it is necessary to replace the timer batteries. Locate the battery cover on the front of the main housing above the filter. Slide the battery cover upward to expose the batteries. Then pull the battery holder out of its compartment. 2. Unwrap the new “AA” size alkaline batteries. Remove 1 old battery from the battery holder and replace it with a new battery. Remove the other used battery and replace it with a new battery (See fig. 4). NOTE: IT IS IMPORTANT TO REPLACE EACH BATTERY ONE AT A TIME TO PREVENT TIMER MEMORY LOSS. REMOVAL OF BOTH BATTERIES CAUSES THE TIMER TO RESET. 3. Gently place the battery holder back inside the main housing and slide the battery cover closed. 4. Replace the front grill by first inserting the three tabs on the top of the front grill. Swing in the bottom of the front grill and press grill firmly onto the unit until the grill locks into place against the main housing. Push side latches downward to lock on the front grill. 5. Plug in and turn on the air purifier. TROUBLESHOOTING CLEANING AND MAINTENANCE INSTRUCTIONS 1) Turn the air purifier off and unplug it before cleaning. 2) The outside of the air purifier and the outlet grill can be cleaned with a soft, clean dampened cloth. 3) If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down. FILTER REPLACEMENT INSTRUCTIONS: 1) Use the Filter Life Indicator as a guide to filter replacement. On average, HEPA filters need to be replaced every 12-18 months. Carbon filters need to be replaced every 3-6 months. Filter life will vary depending on air quality and usage. 2) Turn off the air purifier before attempting to replace the filter. 3) To replace the carbon filter, simply remove the old carbon filter and put the new carbon on the HEPA filter, using the plastic tabs as a guideline. 4) To replace the HEPA filter, discard the old HEPA filters. Insert the new HEPA filter into the unit, by sliding the top in first (see fig. 2). Put the carbon filter back on the HEPA filter. 5) Rep...

Este manual também é adequado para os modelos :
Air - HAP5604 (356.86 kb)
Air - HAP570 (356.86 kb)
Air - HAP575 (356.86 kb)
Air - HAP580 (356.86 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias