Assessments - , GPA:
(
)
)
Fabricante : Hunter Fan
Arquivo Tamanho: 901.44 kb
Arquivo Nome : 42018.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
2. Next, remove the front grill. Place your fingers in the recesses on either side of the top of the grill and pull firmly. 3. The pre-filter is attached to the inside of the grill with hook tape. Pull gently on the pre-filter to remove it. 4. If needed, use a soft damp cloth to wipe off the grill. 5. Install the new pre-filter by placing it in the grill and pressing gently on the prefilter so that it adheres to the hook tape. You may notice a few black particles coming off the pre-filter. Those particles are part of the odor-removing activated carbon and will be collected on the filter during regular use. Continued 9 42018-01 42018-01_rev 01.13.06.pmd 9 1/13/06, 4:35 PM Air Purifier Maintenance 6. Install the grill back onto the unit. First, line up the tabs on the bottom of the grill with the openings on the purifier base and then push the top of the grill forward until it is closed. 7. Plug in the air purifier. NOTE: This unit will not operate unless the grill is in the correct position. 8. Finally, reset the Pre-Filter Counter by pressing the PRE-FILTER RESET key for 2 seconds. The Pre-Filter Counter will return to 100% and the Pre- Filter indicator will stop flashing. Changing the Filter When the filter exceeds 8000 hours (approximately 1 year of use), the Filter Life Counter will display 0% life remaining and the Filter indicator will flash (refer to Filter Life Counters for additional information, pg. 7). This is a reminder that you should check the filter and replace if necessary. The proper time to change the filter depends on usage and the environment. Use the following list to help determine if the filter should be changed: • Compare the color of the filter to the color coded chart on the inside of the housing. If the filter color matches the darkest color on the chart, you should replace the filter. • If you notice a decrease in air output or an increase in noise at any time during normal operation, the filter may be clogged. Replace the filter to return to normal operation. To change the filter and reset the Filter Life Counter: 1. First, turn off and unplug the air purifier. 2. Next, remove the front grill. Place your fingers in the recesses on either side of the top of the grill and pull firmly. 3. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the side of the filter. The new filter will be installed with the same orientation. Once removed, the used filter can be discarded. 4. Remove the new filter from its wrapping and look at the directional arrows printed on the side of the filter. Install the filter with arrows pointing towards the unit. Press the filter firmly into the air purifier. To avoid damaging the filter media, you should press on the frame of the filter only. 5. Reinstall the grill by first lining up the tabs on the bottom of the grill with the openings on the air purifier base and then pushing the top of the grill forward until it is closed. 42018-01 10 42018-01_rev 01.13.06.pmd 10 1/13/06, 4:35 PM Air Purifier Maintenance 6. Plug in the unit. NOTE: This unit will not operate unless the grill is in the correct position. 7. To reset the filter counter, press the FILTER RESET key for 2 seconds. The Filter Counter will return to 100% and the Filter indicator will stop flashing. Obtaining Replacement Filters To obtain replacement filters for your air purifier, first determine your model number by looking at the information label on the back of the air purifier. The model number will be listed on the label. Then, call 1-800-4HUNTER for your nearest retailer or Hunter Customer Service at 1-800-313-3326 (CAN 1-888-855-8300) to order directly. To order online, visit our Website at To ensure that you obtain the correct filters, please find your model number below that specifies the correct replacement filters. Hunter Air Purifier Model No.:.......................... 30245 Pre-Filter Replacement Model No.: ................... 30901 HEPA Filter Replacement Model No.: .............. 30940 11 42018-01 42018-01_rev 01.13.06.pmd 11 1/13/06, 4:35 PM Troubleshooting Problem Solutions 1. No display or operation. • Confirm that the unit is plugged in. • Check the installation of the front grill. • Reset the air purifier. (See Resetting the Air Purifier on pg. 8.) 2. Keypad does not work. •Key pad has been locked to prevent accidental changes to the programs. (See Keypad Lock on pg. 8 to unlock the key pad.) 3. Erratic Display or Operation. • Reset the air purifier. (See Resetting the Air Purifier on pg. 8.) 4. Filter and/or Pre-filter Indicator is Flashing. •The Filter and/or Pre-Filter Life Counters have reached the estimated usage times. Check and replace filters if needed. (Refer to Filter and Pre-Filter Counters on pg. 7.) 5. HEPA Filter and/or Carbon Pre-Filter Life Counter is flashing 0%. •The Filter and/or Pre-Filter Life Counters have greatly exceeded the estimated usage times. Check and replace the...