Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
A wide range of standard face sizes is available, plusnearly any “special” size. Construction Flanders Precisionaire HD Industrial Grade filters are designed with a one-piece moisture-resistantchipboard frame enclosing media. Standard frames are nominal 1 inch thick (3/4 inch actual) and nomi nal 2 inches thick (1-5/8 inches actual). The fiberglass media filter consists of continuous- filament fibers bonded together with thermo-setting resin. The synthetic media filter consists of 100% high bulk polyester fibers that are thermo bonded with a fire retardant resin. Support grilles of perforated corrosion resistantsteel or expanded metal are provided on both sides of the filter. The media pads and support grilles arecontinuously glued to the inside perimeter of the frame, resulting in exceptional strength and rigid ity. This design virtually eliminates the possibility of media sag within the frame. Physical Data Frame:One-piece moisture-resistant chipboard Media: Fiberglass or Synthetic Support Grille: Perforated corrosion-resistant steel or expanded wire on both sides of the filter Sealant: Hot-melt resin Flanders Precisionaire - Foremost in Air Filtration Toll Free: 1-800-347-2220 7 Disposable Air Filers Standard Sizes Performance Data - HD Industrial Grade Nominal Size (in.) Actual Size H x W x D (in) cfm @ 300 fpm Standard Carton Qty. Weight per Carton (lbs.) 10x10x1 9-7/8 x 9-7/8 x 3/4 208 12 3.3 10x20x1 9-7/8 x 19-7/8 x 3/4 417 12 5.2 10x24x1 9-7/8 x 23-7/8 x 3/4 500 12 6.1 10x25x1 9-7/8 x 24-7/8 x 3/4 521 12 6.5 10x30x1 9-7/8 x 29-7/8 x 3/4 625 12 7.0 12x12x1 11 -7/8 x 11 -7/8 x 3/4 300 12 4.0 12x20x1 11 -7/8 x 19-7/8 x 3/4 500 12 5.8 12x24x1 11 -7/8 x 23-7/8 x 3/4 600 12 6.7 12x25x1 11 -7/8 x 24-7/8 x 3/4 625 12 7.5 12x30x1 11 -7/8 x 29-7/8 x 3/4 749 12 8.0 14x14x1 13-7/8 x 13-7/8 x 3/4 408 12 5.2 14x20x1 13-7/8 x 19-7/8 x 3/4 583 12 6.2 14x24x1 13-7/8 x 23-7/8 x 3/4 700 12 7.3 14x25x1 13-7/8 x 24-7/8 x 3/4 729 12 7.7 14x30x1 13-7/8 x 29-7/8 x 3/4 875 12 10.5 15x20x1 14-7/8 x 19-7/8 x 3/4 625 12 6.7 15x25x1 14-7/8 x 24-7/8 x 3/4 781 12 6.8 16x16x1 15-7/8 x 15-7/8 x 3/4 533 12 6.3 16x20x1 15-3/4 x 19-1/2 x 3/4 667 12 6.9 16x24x1 15-7/8 x 23-7/8 x 3/4 800 12 8.5 16x25x1 15-3/4 x 24-5/8 x 3/4 833 12 8.3 18x20x1 17-7/8 x 19-7/8 x 3/4 750 12 8.0 18x24x1 17-7/8 x 23-7/8 x 3/4 900 12 9.0 18x25x1 17-7/8 x 24-7/8 x 3/4 938 12 9.6 19x27x1 18-7/8 x 26-7/8 x 3/4 1069 12 11.8 20x20x1 19-5/8 x 19-5/8 x 3/4 833 12 7.9 20x24x1 19-7/8 x 23-7/8 x 3/4 1000 12 9.5 20x25x1 19-5/8 x 24-5/8 x 3/4 1042 12 9.5 20x30x1 19-7/8 x 29-7/8 x 3/4 1250 12 12.5 22x22x1 21-7/8 x 21-7/8 x 3/4 1008 12 9.5 24x24x1 23-7/8 x 23-7/8 x 3/4 1200 12 11.3 24x30x1 23-7/8 x 29-7/8 x 3/4 1500 12 14.3 25x25x1 24-7/8 x 24-7/8 x 3/4 1302 12 13.5 10x10x2 9-7/8 x 9-7/8 x 1-5/8 208 12 3.9 10x20x2 9-7/8 x 19-7/8 x 1-5/8 417 12 6.6 12x24x2 11-1/2 x 23-1/2 x 1-5/8 600 12 8.0 14x20x2 13-7/8 x 19-7/8 x 1-5/8 584 12 9.1 14x25x2 13-7/8 x 24-7/8 x 1-5/8 730 12 10.5 15x20x2 14-7/8 x 19-7/8 x 1-5/8 625 12 9.6 16x20x2 15-3/4 x 19-1/2 x 1-5/8 667 12 9.6 16x24x2 15-3/4 x 23-1/2 x 1-5/8 800 12 11.6 16x25x2 15-3/4 x 24-1/2 x 1-5/8 834 12 11.6 18x24x2 17-7/8 x 23-7/8 x 1-5/8 900 12 12.8 20x20x2 19-1/2 x 19-1/2 x 1-5/8 834 12 11.9 20x24x2 19-1/2 x 23-1/2 x 1-5/8 1000 12 14.2 20x25x2 19-1/2 x 24-1/2 x 1-5/8 1042 12 14.0 24x24x2 23-1/2 x 23-1/2 x 1-5/8 1200 12 16.0 25x25x2 24-7/8 x 24-7/8 x 1-5/8 1302 12 17.2 Typical initial (clean) pressure drop at nominal cfm is 0.07 in. w.g. for 1 in. filters and 0.10 in. w.g. for 2 in. filters. Recommended final resistance is 0.50 in. w.g., but the system design may dictate a lower change out point. Guide Specifications 1.0 General 2.2 Perforated corrosion resistant steel or expanded 1.1 Disposable filters shall be Model HD Industrial metal support grilles shall be furnished on both Grade filters as manufactured by Flanders entry and exit sides of the filter. Precisionaire. 2.3 Media and grilles shall be continuously glued to 1.2 Filters shall be UL 900 Class 2 listed. the inside perimeter of the frame. 2.0 Filter Construction 3.0 Performance 2.1 Filters shall be constructed of fiberglass or syn- 3.1 The manufacturer shall guarantee performancethetic media (as specified) enclosed in a one-as stated in its literature within tolerances as out- piece chipboard frame. lined in Section 7.4 of ARI Standard 850. 8 ...